What did you do to your S550 Mustang today?!

[BradleyMac]

Just picked her up from getting the FP PP2 installed. What a difference.

Please elaborate on your expression "what a difference". I'm considering also purchasing the PP2 vrs the Livernois Tune. Thanks.

Sponsored

 

[Cobraracer79]

A Few things done:
BMR IRS Cradle Lockout CBOO5H
BMR Front Subframe Chassis Brace
BMR Sway bar Set SBO43R
BMR Super Low Profile Chassis Jacking Rails CJROO2H
Schroth QuickFit Harness SR 17110
Steeda S550 Mustang Camber Plates 555 8139
Steeda S550 Mustang Rear Adjustable Camber Arms 555 4123
BC Forged RS31 19x10.5
BC Forged RS31 19x11.5
Bridgestone RE-71 305/30/19

 

[Houston Kid]

Sounds good and the tips look good! How much for the axleback?

Got them from Steeda for about $1,200 but I ordered a bunch of stuff and received a friendly forum discount.

 

[Houston Kid]

After exhaust, I prepped and painted the rotors. No nasty looking rusty centers for me.

 

[HoosierDaddy]

After exhaust, I prepped and painted the rotors. No nasty looking rusty centers for me.

Should have hung them close together for the ultimate wind chimes.

 

[lazarus870]

Took it out for a drive. I have been getting annoyed with it driving in heavy stop and go traffic to work. So I take my Corolla to work and leave the 5.0 for evenings/weekends. Took it out for a nighttime drive here. It's cold at about 38 degrees F, so I couldn't punch it as I could feel the car breaking loose even with just a bit of gassin' it, but it was nice.

If you ever complain about your gas prices, right now in Vancouver, Canada gas is 5.85 a gallon for 87 octane. I think about 6.43 for 91?
Highest prices in North America currently due to insane tax, and some other crap.

 

[Prabzez_5.0]

Took it out for a drive. I have been getting annoyed with it driving in heavy stop and go traffic to work. So I take my Corolla to work and leave the 5.0 for evenings/weekends. Took it out for a nighttime drive here. It's cold at about 38 degrees F, so I couldn't punch it as I could feel the car breaking loose even with just a bit of gassin' it, but it was nice.

If you ever complain about your gas prices, right now in Vancouver, Canada gas is 5.85 a gallon for 87 octane. I think about 6.43 for 91?
Highest prices in North America currently due to insane tax, and some other crap.

That's why I've been filling up gas exclusively from across the border for the past year, so much money saved.
Gas is ridiculous in Vancouver because Alberta is to blame, we need to be buying our gas from the U.S. instead.

 

[Endokendal]

Got my 2018 GT and traded in my 2015! So excited!

Also learned the hard way the 2018 steering wheel is not the same as the 2015 (air bag alignment holes are different) after trying to swap on my custom 2015 wheel.

And the MMR hood prop rods from 2015 also do not fit the 2018 hood.

Small bummers but don’t kill my buzz on the fantastic new car!

 

[tukn20s]

Please elaborate on your expression "what a difference". I'm considering also purchasing the PP2 vrs the Livernois Tune. Thanks.

the responsiveness of the pedal. you can feel the torque at the low end and mid range. it is just FASTER..

 

[gameovergt]

Dr. ColorChip kit just came in, gonna fix the hood.

 

[2morrow]

A Few things done:
BMR IRS Cradle Lockout CBOO5H
BMR Front Subframe Chassis Brace
BMR Sway bar Set SBO43R
BMR Super Low Profile Chassis Jacking Rails CJROO2H
Schroth QuickFit Harness SR 17110
Steeda S550 Mustang Camber Plates 555 8139
Steeda S550 Mustang Rear Adjustable Camber Arms 555 4123
BC Forged RS31 19x10.5
BC Forged RS31 19x11.5
Bridgestone RE-71 305/30/19

That’s a nice upgrade, Props!

Sounds like someone might be looking at track dates…

 

[mulage]

Received the second set of bumper and mirror mask just in time for bug season.
-

how well do those mirror mask fit? pics?

 

[GenXGeekDad]

No, dealer too expensive. Found a speed shop by me with certified ASE mechanic so warranty is still valid.

Awesome! So, how does that work, does the ASE mech fill out paperwork and sign off. I have a contact who is ASE certified, and kinda wanted to do the work myself...with his 'assistance'. Just curious on how I could make that work...

Sponsored