Ford oil catch cans

[Voodooo]

Mine does sit kind of weird. Reversing it looks like it fits better.


Sent from my iPhone using Tapatalk

Do you have the driver side? That's easy to install also.

Sponsored

 

[Myshelby3425]

Do you have the driver side? That's easy to install also.

Yea I have it on. Pretty simple installs. The drivers side required some cutting of that thermal shield but I decided not to cut it and have it bolted down on the intake and the push pin under the strut bar. Sits fine.


Sent from my iPhone using Tapatalk

 

[Voodooo]

I used a longer push pin and wonder why ford performance didn't include the longer push pin because I didn't want to cut the shield


Sent from my iPhone using Tapatalk

 

[dkbluedevil]

Call me an idiot, but on the passenger side one again, how do you move the big vertical electrical bundle out of the way so you can even get the separator to where it's supposed to attach?

 

[Voodooo]

Call me an idiot, but on the passenger side one again, how do you move the big vertical electrical bundle out of the way so you can even get the separator to where it's supposed to attach?

I didn't have to move the large harness. Mine fit good without touching it.

 

[Texas Gator]

I had to nudge mine over a bit

Sent from my Nexus 5 using Tapatalk

 

[dkbluedevil]

Thank you all very much. Finally got it on right.

 

[Voodooo]

Thank you all very much. Finally got it on right.

Good to hear, did you install one or two cans?

 

[dkbluedevil]

Good to hear, did you install one or two cans?

Just the one so far. My vendor didn't have the -A50S on hand yet so I need to just order it from somebody.

It was definitely a needed mod. The stock hose is coated inside with oil.

 

[Voodooo]

Just the one so far. My vendor didn't have the -A50S on hand yet so I need to just order it from somebody.

It was definitely a needed mod. The stock hose is coated inside with oil.

The driver said is easy to install. When you get one "DO NOT" cut the insulation mat. I didn't use the included push pin, I used one that's about 1/4" longer. Their are 3 mounting points, one that uses the CAI mounting stud, one beneath the strut tower brace on the tower itself and another on the strut tower that needs the longer push pin I mentioned.

 

[dkbluedevil]

The driver said is easy to install. When you get one "DO NOT" cut the insulation mat. I didn't use the included push pin, I used one that's about 1/4" longer. Their are 3 mounting points, one that uses the CAI mounting stud, one beneath the strut tower brace on the tower itself and another on the strut tower that needs the longer push pin I mentioned.

Where does one get the longer push pin?

 

[Voodooo]

Where does one get the longer push pin?

Any napa or automotive paint store should have them

 

[Traffic22]

I know the GT350 driver's side can is not designed for the regular GT, but I'm curious if anyone has tried?

I've got my passenger side on order and would like an OEM solution for the driver's side.


Sent from my iPad using Tapatalk HD

 

[70monte]

I know the GT350 driver's side can is not designed for the regular GT, but I'm curious if anyone has tried?

I've got my passenger side on order and would like an OEM solution for the driver's side.


Sent from my iPad using Tapatalk HD

Here is someone who installed one on the driver's side of a 14 GT. I imagine you could also make it work on a regular 15/16 GT.
http://themustangsource.com/forums/...ance-oil-separator-540283/index2/#post6973086

Wayne

 

[Traffic22]

Thanks Wayne,

I may take a chance and see if I can make it work. I'm still waiting on the FRPP performance pack, so I'm going to wait and see if that ends up including a CAI.

Would hate to spend the time hooking it up, just to have to do it again if the intake changes.

Appreciate the link/help.

Chuck


Sent from my iPad using Tapatalk HD

Sponsored