Who has underglow ?

[Twotall77]

My car normally for reference:

I love your car an the build. I follow you on IG this style is what I'll be aiming for in my DIB GT.

Sponsored

 

[Zrussian13]

Yeah if you could later that would be much appreciated! So you wired to fuse box under the hood and assuming went through the grommet to mount under the passenger feet area ?

Yes I ran it thru the grommet on the passanger side wheel well. I circled the tap I used for the lights. The other two are for my meth kit.

 

[JoeSpeed]

This guy has under glow and overhead glow, lol..

I should show this to my sister, she’d do this to the kitchen (she lives with me as she saves for her own place)

 

[Muhnopoly]

Yes I ran it thru the grommet on the passanger side wheel well. I circled the tap I used for the lights. The other two are for my meth kit.

Thanks dude ! Really appreciate it, did you hook up the optional aux cable for the "door assist" so it lights up when you open the doors ?

 

[Zrussian13]

Thanks dude ! Really appreciate it, did you hook up the optional aux cable for the "door assist" so it lights up when you open the doors ?

Yes I did. Only bad thing on the mustang is with the fade on function of the interior lights, the leds flicker for a second before lighting up completely.

 

[Muhnopoly]

Yes I did. Only bad thing on the mustang is with the fade on function of the interior lights, the leds flicker for a second before lighting up completely.

I'll see if I'm able to figure out where to tap in for that. Google should help me find the correct terminal and the way your wired everything I'm pretty much gonna copy, they only go on when you turn them on right? Or they go on every time the car is on ? (Talking about in general....not the courtesy lights)

 

[Zrussian13]

I'll see if I'm able to figure out where to tap in for that. Google should help me find the correct terminal and the way your wired everything I'm pretty much gonna copy, they only go on when you turn them on right? Or they go on every time the car is on ? (Talking about in general....not the courtesy lights)

Courtesy go on any time the interior lights go on but other than that yes they only go on when you turn them on. Look up raxiom interior lights for the mustang. I think that's the name? I believe its American muscle that has an install video for them and they tie into the interior light circuit on the passanger side. I used that to find the wire for the trigger tie in.

 

[Muhnopoly]

Courtesy go on any time the interior lights go on but other than that yes they only go on when you turn them on. Look up raxiom interior lights for the mustang. I think that's the name? I believe its American muscle that has an install video for them and they tie into the interior light circuit on the passanger side. I used that to find the wire for the trigger tie in.

Got it ! I'm gonna attempt install Saturday or Sunday so I'll post results when I'm done ! Thanks alot for the tips !!

 

[MCS]

I have an opt7 kit. Works good and runs off an app. I'd buy their bundle so you have different sizes to work with. There's not really any place to mount a 3ft tube in the back so im running two 12" lights back there. Used the extra 3ft in my grill.

So you have 1x 3ft in the front, 2x what? 5" on the sides? and 2x 12" on the rears? Did they send this all to you with a bundle?

 

[Zrussian13]

So you have 1x 3ft in the front, 2x what? 5" on the sides? and 2x 12" on the rears? Did they send this all to you with a bundle?

I have a 3ft under the front, 4fts on the sides, 2- 12" in the back and in the grill I put 1- 3ft and 2- 12".

 

[dirtwarrior]

I like the rim lights

 

[Twister_Orange_5oh]

I have a 3ft under the front, 4fts on the sides, 2- 12" in the back and in the grill I put 1- 3ft and 2- 12".

Thanks for the information. I just ordered the same kit to install this week. Can you please elaborate on this " grommet" on the passenger side? Should I take that wheel off and pull back the lining or something? I just don't know what you are referencing.

Did you screw the light bars down for the side strips, or use a different method? I installed jacking rails and am a bit confused on where good placement would be for them.

I was thinking about buying powerful magnets and gluing them on the the strips and just connecting to the jacking rails

 

[Muhnopoly]

Thanks for the information. I just ordered the same kit to install this week. Can you please elaborate on this " grommet" on the passenger side? Should I take that wheel off and pull back the lining or something? I just don't know what you are referencing.

Did you screw the light bars down for the side strips, or use a different method? I installed jacking rails and am a bit confused on where good placement would be for them.

I was thinking about buying powerful magnets and gluing them on the the strips and just connecting to the jacking rails

I'm installing mine as we speak. Quick breakfast break though. I'll post pics where I mount mine. Had to run to home depot also for some hard metal drill bits

 

[MCS]

I'm installing mine as we speak. Quick breakfast break though. I'll post pics where I mount mine. Had to run to home depot also for some hard metal drill bits

This is the OPT7? Let me know how your front and rear turn out as I'm thinking of ordering the same kit and have a deadline tomorrow.

I'm assuming you got this one? LED Underglow Lights Kit AURA PRO Bluetooth | OPT7 (opt-7.com)

 

[Zrussian13]

Thanks for the information. I just ordered the same kit to install this week. Can you please elaborate on this " grommet" on the passenger side? Should I take that wheel off and pull back the lining or something? I just don't know what you are referencing.

Did you screw the light bars down for the side strips, or use a different method? I installed jacking rails and am a bit confused on where good placement would be for them.

I was thinking about buying powerful magnets and gluing them on the the strips and just connecting to the jacking rails

Yes pull the fender liner back and you'll see the grommet on the passanger side. I used screws on both ends of the light bars plus I used zipties and tie wire along the lights so they don't flex.

I also have jacking rails. My lights are mounted about 8" in from the sides. I didn't want them near the rails. Lights project well from there.

Sponsored