22MAVXLT
Well-Known Member
- Thread starter
- #1
I know some of you guys are fitment experts so I need some help. I am currently on my stock 19x8.5 42.5mm wheels with 20mm spacers on all 4 corners. This makes the rear completely flush, while leaving the front a tad inset, maybe like a 1/4". I know Steeda recommended a 25mm spacer for the front to sit flush, but I kept it the same all around.
Now, I have ordered new wheels, Forgestar D5's to be exact. I got 18x9 with 22mm offset for the front and 18x10 42mm offset for the rear. So I use an offset calculator and it tells me that the rear is gonna be almost the exact same as my setup now, while the front will sit an extra 6mm further out than my current setup. I know there are companies that make 10" front wheels that sit the exact same as these, for instance the project6gr wheels. My question is this, am I going to have just a slight poke in the front? I am going to be running 255/45/18 front tires with 315/40/18 rears.
Now, I have ordered new wheels, Forgestar D5's to be exact. I got 18x9 with 22mm offset for the front and 18x10 42mm offset for the rear. So I use an offset calculator and it tells me that the rear is gonna be almost the exact same as my setup now, while the front will sit an extra 6mm further out than my current setup. I know there are companies that make 10" front wheels that sit the exact same as these, for instance the project6gr wheels. My question is this, am I going to have just a slight poke in the front? I am going to be running 255/45/18 front tires with 315/40/18 rears.
Sponsored
Last edited: