Wheel alignment

[WildHorse]

Figured I'd ask in this section. What's the prefered front/rear alignment for drag racing ? I'll assume zero camber all the way around ? For reference 28x6x18 fronts. 28x11.5x17 rears. Thanks.

Sponsored

 

[NGOT8R]

Getting ready to make some hits Wildhorse? What’s your best ET, MPH and sixty to date?

 

[WildHorse]

Getting ready to make some hits Wildhorse? What’s your best ET, MPH and sixty to date?

Yes Sir. Zero on the new set-up. Old setup 101.78 / 7.24 / 1.83

 

[NGOT8R]

Yes Sir. Zero on the new set-up. Old setup 101.78 / 7.24 / 1.83

Still running the factory clutch?

 

[WildHorse]

Still running the factory clutch?

Yup.

 

[WildHorse]

Thanks for the info buddy ! And will do !!

 

[WildHorse]

I'm not a fan of those two haha

 

[deanm11]

I'll chime in at least as to front camber. I also thought as little as possible, maybe -0.5 degrees. I spoke with Steeda from whom I bought most of the rear suspension and they were of the opinion a drag car should have least -1 degree front camber, as this will result in near zero when the nose is lifted down the track. Otherwise a static zero camber will result in positive camber under hard acceleration.

 

[WildHorse]

Not for me.. this is primarily a street car.

Sponsored