Sponsored

What's In DFB's Cabinet?

OP
OP
DFB5.0

DFB5.0

Well-Known Member
Joined
Mar 15, 2017
Threads
93
Messages
5,458
Reaction score
15,727
Location
Australia
Vehicle(s)
Mustang GT Fastback
In that sort of temp do you wash then dry the car as you go? I find that on hot days the car air-dries faster than I can get around and wash, then dry.
I have a pretty swift routine with washing my "clean dirty" cars, so I move quickly around the car before things dry and then move into the garage to dry.

Quite often, if I wash early enough in the day, I actually end up with the front half of the car in shade and the back half in the sun. Therefore, I start at the front and work my way back, limiting the time soap is on the paint in the sunlight before the final rinse.

IMG-0284.jpg


Although I don't often do this, but I also have the luxury of washing cars inside the garage if needed.

IMG-2077.jpg


IMG-0789.jpg


IMG-0777.jpg
Sponsored

 
OP
OP
DFB5.0

DFB5.0

Well-Known Member
Joined
Mar 15, 2017
Threads
93
Messages
5,458
Reaction score
15,727
Location
Australia
Vehicle(s)
Mustang GT Fastback
On this day one year ago, I finished installing my Swisstrax flooring.

IMG-1869.jpg


IMG-0093.jpg


I thoroughly enjoyed the huge job this was, my poor knees didn't though, they protested for a week after the install. :facepalm:

IMG_0111.jpg


IMG_0116.jpg


IMG_0119.jpg


IMG_0123.jpg


Working with my head down bum up all day, the moment when I finally stood back and looked at the transformation was somewhat overwhelming.

IMG-0133.jpg


IMG-0153.jpg


IMG-0145.jpg


IMG_0201.jpg


The transformation was all about the visual impact, but it also had practical benefits too including ease of cleaning and safer detailing due to the lack of standing water.

IMG_0267.jpg


IMG_0350.jpg


IMG_0777.jpg


IMG_0717.jpg


Would I do it again? Absolutely yes!
 

Jackismydog

Well-Known Member
Joined
Jun 4, 2021
Threads
40
Messages
237
Reaction score
166
Location
L'Islet,Qc Canada
First Name
Francois
Vehicle(s)
Mustang GT 2016 Convertible
On this day one year ago, I finished installing my Swisstrax flooring.

IMG-1869.jpg


IMG-0093.jpg


I thoroughly enjoyed the huge job this was, my poor knees didn't though, they protested for a week after the install. :facepalm:

IMG_0111.jpg


IMG_0116.jpg


IMG_0119.jpg


IMG_0123.jpg


Working with my head down bum up all day, the moment when I finally stood back and looked at the transformation was somewhat overwhelming.

IMG-0133.jpg


IMG-0153.jpg


IMG-0145.jpg


IMG_0201.jpg


The transformation was all about the visual impact, but it also had practical benefits too including ease of cleaning and safer detailing due to the lack of standing water.

IMG_0267.jpg


IMG_0350.jpg


IMG_0777.jpg


IMG_0717.jpg


Would I do it again? Absolutely yes!
DFB, What a great job you did! I have a couple of questions, perdon my ignorance. As I do see that the floor looks very flat ( no curve for draining) and I do not see any drain pit in the center of the garage, where does the water go ? It dries stock between the tiles ?
 
OP
OP
DFB5.0

DFB5.0

Well-Known Member
Joined
Mar 15, 2017
Threads
93
Messages
5,458
Reaction score
15,727
Location
Australia
Vehicle(s)
Mustang GT Fastback
DFB, What a great job you did! I have a couple of questions, perdon my ignorance. As I do see that the floor looks very flat ( no curve for draining) and I do not see any drain pit in the center of the garage, where does the water go ? It dries stock between the tiles ?
Many thanks.

There is a drain under the floor towards the front. For any water that falls through the tiles, it drains away via the channels molded in the bottom of the tiles or simply evaporates away.
 
OP
OP
DFB5.0

DFB5.0

Well-Known Member
Joined
Mar 15, 2017
Threads
93
Messages
5,458
Reaction score
15,727
Location
Australia
Vehicle(s)
Mustang GT Fastback
Even hotter today, 40 deg C / 104 deg F is well above my comfort threshold. I don't wash in the garage often, but it's certainly a useful option to have on a day like this.

IMG-6469.jpg


Tyres scrubbed with P&S Undressed, wheels washed with Adam's Car Shampoo and then topped with Gyeon Wet Coat.

Adam's Car Shampoo was also used on the paint. I love how thickly this soap foams, it smells nice and offers great slickness. I have also noticed that it's one of the better soaps when washing in direct sunlight.

IMG-6474.jpg


The key thing to consider when washing indoors is to be careful of your angles with the pressure washer, in both rinsing and foaming.

IMG-6477.jpg


IMG-6479.jpg


Drying aid today was NV Boost v2.

IMG-6482.webp


Glass was attended to with Gyeon Glass, interior wiped down with ONR, engine bay wiped over with Paint Gloss. I dressed the tyres with OG Tire Dressing, this product works really well on Dunlop Sport Maxx.

IMG-6488.jpg


IMG-6489.jpg


Back to spec and ready to be covered up again.
 

Sponsored

OP
OP
DFB5.0

DFB5.0

Well-Known Member
Joined
Mar 15, 2017
Threads
93
Messages
5,458
Reaction score
15,727
Location
Australia
Vehicle(s)
Mustang GT Fastback
The first of three Boxing Day orders, this one being from The Detail Store.

IMG-6520.jpg


Any time Koch Chemie GSF is on sale is a good thing. At $53.95 AUD for a 1L bottle, any discount is welcomed, in this case 10% off.

Next, two new-to-me Angelwax products, FastFoam and ELIXIR tire dressing. Interestingly, both of these products are unscented.

https://www.detailstore.com.au/produ...32482266218551
https://www.detailstore.com.au/produ...dressing-500ml

The Rag Company Pearl Applicator Sponge is something handy to have in stock, used for applying dressings on the interior and exterior. I also use them for glass cleaning and applying ceramic coatings.

https://www.detailstore.com.au/produ...39439071019063

IMG_3506.jpg


IMG_5649.webp


IMG_4259.jpg


And......................I finally succumbed to giving one of these a try...........

https://www.detailstore.com.au/produ...acid-resistant

IMG-6515.webp


This is the iK MULTI Pro 2 sprayer and not the more popular iK FOAM Pro 2 foamer. I will be using this for applying pre-soak rinse-less products, the foaming version is useless for me as I just use a foam cannon.
 

MAGS1

Well-Known Member
Joined
Mar 6, 2020
Threads
97
Messages
11,618
Reaction score
19,075
Location
Somewhere in Middle America
First Name
Mark
Vehicle(s)
2022 Mustang GT
The first of three Boxing Day orders, this one being from The Detail Store.

IMG-6520.jpg


Any time Koch Chemie GSF is on sale is a good thing. At $53.95 AUD for a 1L bottle, any discount is welcomed, in this case 10% off.

Next, two new-to-me Angelwax products, FastFoam and ELIXIR tire dressing. Interestingly, both of these products are unscented.

https://www.detailstore.com.au/produ...32482266218551
https://www.detailstore.com.au/produ...dressing-500ml

The Rag Company Pearl Applicator Sponge is something handy to have in stock, used for applying dressings on the interior and exterior. I also use them for glass cleaning and applying ceramic coatings.

https://www.detailstore.com.au/produ...39439071019063

IMG_3506.jpg


IMG_5649.jpg


IMG_4259.jpg


And......................I finally succumbed to giving one of these a try...........

https://www.detailstore.com.au/produ...acid-resistant

IMG-6515.jpg


This is the iK MULTI Pro 2 sprayer and not the more popular iK FOAM Pro 2 foamer. I will be using this for applying pre-soak rinse-less products, the foaming version is useless for me as I just use a foam cannon.
I bought the same sprayer for rinseless washes. Planning on using it today or tomorrow
 
OP
OP
DFB5.0

DFB5.0

Well-Known Member
Joined
Mar 15, 2017
Threads
93
Messages
5,458
Reaction score
15,727
Location
Australia
Vehicle(s)
Mustang GT Fastback
Boxing Day order number two, this one from Car Care Products...........

IMG-6522.webp


I have been eyeing Nextzett Cockpit Premium for a while now, I forgot about it for a while after discovering how brilliant P&S Express was. What I like about both Express and the Cockpit is that it doesn't make the interior shiny. And yes, it does have a slight "urinal cake" scent to it, not as bad as you would think though and somewhat similar to all the other lemon scented interior cleaners on the market. (Side note, why does it seem all interior cleaners/detailers are lemon scented?)

https://www.carcareproducts.com.au/nextzett-cockpit-premium-interior-plastic-cleaner-500ml.html

Now that Meguiar's M39 has been discontinued, I'm on the lookout for a product that can replace it. M39 was a pretty obscure product, one that was typically bought by the body shop industry, but it had an amazing ability to deep clean unpainted black plastic parts. Think door handles, grills, exterior trims ect.

IMG-2404.webp


I noticed that Nextzett make a product called Plastikreinigner (Plastic Deep Cleaner) which may just be the replacement for M39.

https://www.carcareproducts.com.au/nextzett-plastic-deep-cleaner-500ml.html

Gyeon Q2M Ceramic Detailer is another take on a lite spray sealant detailer/drying aid. I have heard conflicting stories about this product, some love it, some say it's terrible. I guess I will find out soon enough.

https://www.carcareproducts.com.au/gyeon-q2m-ceramic-detailer-400ml.html

The black Mint applicators are just super useful to have around, I use these for applying tyre dressing, even though they were primarily designed for wax and sealant application.

https://www.carcareproducts.com.au/mint-foam-wax-applicator.html

And the white Gyeon tube is actually an insulated water bottle, because why not?

https://www.carcareproducts.com.au/gyeon-water-bottle-white.html
 

GT 550

Well-Known Member
Joined
Sep 4, 2017
Threads
31
Messages
2,238
Reaction score
1,993
Location
Australia
Vehicle(s)
Black GT MT S550
Time to go shopping, you're running out of orders to unpack :giggle:

it had an amazing ability to deep clean unpainted black plastic parts.
Interesting, how does it differ in effect from an APC or something like Brake Buster which can be used for wheel arch liners etc? Wondering if Bowden's Paint Cleanse and Restore, which is marketed as a paint cleaner, would work similarly:

https://www.bowdensown.com.au/products/exterior/paint-cleanse-restore

And! It's not lemon scented:

  • Smells like a nice, warm afternoon in the Queensland tropics.
 
OP
OP
DFB5.0

DFB5.0

Well-Known Member
Joined
Mar 15, 2017
Threads
93
Messages
5,458
Reaction score
15,727
Location
Australia
Vehicle(s)
Mustang GT Fastback
Time to go shopping, you're running out of orders to unpack :giggle:



Interesting, how does it differ in effect from an APC or something like Brake Buster which can be used for wheel arch liners etc? Wondering if Bowden's Paint Cleanse and Restore, which is marketed as a paint cleaner, would work similarly:

https://www.bowdensown.com.au/products/exterior/paint-cleanse-restore

And! It's not lemon scented:

  • Smells like a nice, warm afternoon in the Queensland tropics.
I have one more order on the way, will be into next week now. Bloody public holidays, get back to work you lazy bastards! :wink:

Meguiar's M39 had a very specific use case for me, able to remove stuff from unpainted plastics like no APC could. It can also remove polish residue from rubber trims. M39 is not a product I use very often, but it's got me out of trouble enough times that it had earned a place in my cabinet.

These are the sort of plastics I'm talking about......................

IMG-3144.webp


vv.webp


IMG-6869.webp


IMG-6874.jpg


I often use Brake Buster for wheel arch cleaning, but I wouldn't be comfortable using it on the above parts. I probably would suggest using the Bowden's Paint Cleanser on unpainted trims.
 

Sponsored

GT 550

Well-Known Member
Joined
Sep 4, 2017
Threads
31
Messages
2,238
Reaction score
1,993
Location
Australia
Vehicle(s)
Black GT MT S550
I often use Brake Buster for wheel arch cleaning, but I wouldn't be comfortable using it on the above parts. I probably would suggest using the Bowden's Paint Cleanser on unpainted trims.
Do you think BB might bleach the trim?
 
OP
OP
DFB5.0

DFB5.0

Well-Known Member
Joined
Mar 15, 2017
Threads
93
Messages
5,458
Reaction score
15,727
Location
Australia
Vehicle(s)
Mustang GT Fastback
My old man had to have a tyre replaced on his Ranger yesterday. Of course, they just had to apply that horrible silicone dressing to all the tires afterwards........................ :facepalm:

IMG-6525.jpg


IMG-6528.jpg


IMG-6530.webp


IMG-6531.jpg


I wonder how many passes with a heavy-duty tire cleaner I'm going to need to remove that stuff from the tyres, wheels and wheel arches. 😡
 

GT 550

Well-Known Member
Joined
Sep 4, 2017
Threads
31
Messages
2,238
Reaction score
1,993
Location
Australia
Vehicle(s)
Black GT MT S550
This from a man who just unpacked a bottle of ELIXIR to try.

'Oh pleeeeeease don't make me try my new tyre dressing'.

Crocodile tears if there ever where... :giggle::like:
 
OP
OP
DFB5.0

DFB5.0

Well-Known Member
Joined
Mar 15, 2017
Threads
93
Messages
5,458
Reaction score
15,727
Location
Australia
Vehicle(s)
Mustang GT Fastback
This from a man who just unpacked a bottle of ELIXIR to try.

'Oh pleeeeeease don't make me try my new tyre dressing'.

Crocodile tears if there ever where... :giggle::like:
At least Elixir won't need a sledgehammer chemical to remove it when I want to try something else. :facepalm:

If you look closely, that horrible stuff has slung all over the wheel arches and there was even some on the side steps. :facepalm:

I can guess why they use this stuff; it will come in a huge drum and would be supplied by a chemical rep for cheap. With the huge choice in tire dressings now, there is no excuse for using something like this, water-based dressings are easier to apply, don't sling and can also be supplied in large quantities.
Sponsored

 
 








Top