Sponsored

Water-Methanol Injection

Zrussian13

Well-Known Member
Joined
Nov 16, 2018
Threads
28
Messages
2,659
Reaction score
2,768
Location
Phoenix
First Name
Chris
Vehicle(s)
2019 Mustang GT, 2018 Acura MDX
I assure you it's not too small... It is a 24 gal/hr: Since I got spacers the Temps move a lot slower than it used to. Now, I do get -KnockR all the way up to 8000. I have a breakout, it's in the Rear of the supercharger.
That's a shit ton of meth!
Sponsored

 

wish i was fast

Well-Known Member
Joined
Oct 26, 2022
Threads
0
Messages
53
Reaction score
26
Location
california
First Name
mike
Vehicle(s)
2015 mustang gt s550
I assure you it's not too small... It is a 24 gal/hr: Since I got spacers the Temps move a lot slower than it used to. Now, I do get -KnockR all the way up to 8000. I have a breakout, it's in the Rear of the supercharger.
so your running .4 gallons per minute. that's almost a half a gallon a minute. are you sure about that?
 

illtal

Well-Known Member
Joined
Nov 16, 2018
Threads
17
Messages
2,121
Reaction score
1,040
Location
USA
Vehicle(s)
2018 Mustang GT
so your running .4 gallons per minute. that's almost a half a gallon a minute. are you sure about that?
YES ... I have the other BIGGER nozzle here all which where labeled in gal/hr. now they are labeled in orifice size, which is harder to tell what's going on with them.
 

Cory S

Well-Known Member
Joined
Dec 10, 2019
Threads
47
Messages
3,355
Reaction score
3,751
Location
Bradford, NH
First Name
Cory
Vehicle(s)
2016 Mustang GT Premium
so your running .4 gallons per minute. that's almost a half a gallon a minute. are you sure about that?
.4/minute isn't THAT much. It's about the proper amount of volume/flow for 60-80% Methanol on a setup making 750-900whp. I used to run 28GPH @ 140psi system pressure for 780whp.
 

Sponsored

illtal

Well-Known Member
Joined
Nov 16, 2018
Threads
17
Messages
2,121
Reaction score
1,040
Location
USA
Vehicle(s)
2018 Mustang GT
1 gal/hr is 63 cc .... which is 1512, which isn't even 10% of total fuel available to the system.
 

Cory S

Well-Known Member
Joined
Dec 10, 2019
Threads
47
Messages
3,355
Reaction score
3,751
Location
Bradford, NH
First Name
Cory
Vehicle(s)
2016 Mustang GT Premium

Cory S

Well-Known Member
Joined
Dec 10, 2019
Threads
47
Messages
3,355
Reaction score
3,751
Location
Bradford, NH
First Name
Cory
Vehicle(s)
2016 Mustang GT Premium

Sponsored

Cory S

Well-Known Member
Joined
Dec 10, 2019
Threads
47
Messages
3,355
Reaction score
3,751
Location
Bradford, NH
First Name
Cory
Vehicle(s)
2016 Mustang GT Premium
but we are talking almost a half a gal a minute. not hour
Do you realize how much fuel at WOT can be consumed for an entire minute with setups making 700+whp? A LOT......... :)
 

wish i was fast

Well-Known Member
Joined
Oct 26, 2022
Threads
0
Messages
53
Reaction score
26
Location
california
First Name
mike
Vehicle(s)
2015 mustang gt s550
Don't know about your calc. But one gal/hr is 63 cc/min. 24*63
OK not sure your point but they did not say they were running .4/gal per hour they said .4/ per minute. 24/gal per hour. almost half a gallon per minute.
 
Last edited:

illtal

Well-Known Member
Joined
Nov 16, 2018
Threads
17
Messages
2,121
Reaction score
1,040
Location
USA
Vehicle(s)
2018 Mustang GT
OK not sure your point but they did not say they were running .4/gal per hour they said .4/ per minute. 24/gal per hour. almost half a gallon per minute.
What's your point?

I stated that I run a 24 gallon per hour nozzle, not they, I did. @Cory S stated he ran a 28 gallon per hour nozzle. Do you realize the line pressure dictates flow? It could be more or less. Next point is that I have yet to spend an entire minute boosted in the throttle.

You're weird. You do realize that there are conversion factors and different units of measurements especially for measurements over time. Things can tend to end up the same even if you don't realize that.

Example one. I buy a 1000cc injector. It is labeled as 1000cc a min. It is also labeled 95 lbs a hr. Question for you is which one is more?

Example two 1 mile per hour is equal to .447 meters a second.

BACK TO THE UPPER INJECTORS. 8 - 1000 CC injectors is equal to 127 gallons per hour. Do your own comparison to the water meth availability.
 

wish i was fast

Well-Known Member
Joined
Oct 26, 2022
Threads
0
Messages
53
Reaction score
26
Location
california
First Name
mike
Vehicle(s)
2015 mustang gt s550
What's your point?

I stated that I run a 24 gallon per hour nozzle, not they, I did. @Cory S stated he ran a 28 gallon per hour nozzle. Do you realize the line pressure dictates flow? It could be more or less. Next point is that I have yet to spend an entire minute boosted in the throttle.

You're weird. You do realize that there are conversion factors and different units of measurements especially for measurements over time. Things can tend to end up the same even if you don't realize that.

Example one. I buy a 1000cc injector. It is labeled as 1000cc a min. It is also labeled 95 lbs a hr. Question for you is which one is more?

Example two 1 mile per hour is equal to .447 meters a second.

BACK TO THE UPPER INJECTORS. 8 - 1000 CC injectors is equal to 127 gallons per hour. Do your own comparison to the water meth availability.
i had no problem with any of your debate tell you decided that since you don't see my point you felt that somehow you are entitled and since you can't understand then i must be weird. maybe your point was correct maybe not. but it doesn't matter because your character it far from correct. you could have said the same thing but you felt by making it personal you somehow are right? character, you should try some.
Sponsored

 
 








Top