Sponsored

Water Deionizer/spot free setup

kilobravo

Well-Known Member
Joined
Aug 10, 2019
Threads
95
Messages
8,724
Reaction score
8,807
Location
Corpus Christi, TX
Website
kilobravo.com
First Name
KB
Vehicle(s)
'16 CT6, '18 SD, '20 GT 500
Hey, if the pump sprayer works for you, rock 'n roll but honestly, it seems like a whole lot of effort pumping and spraying. There's almost no force coming out of the sprayer to push the hard water off so you'd have to get right down next to the surface to get any movement of the bad water.

All this to save less than a few hundred bux for a softener rig? Do yourselves a favor and get a DIC-20 or similar and put the pump sprayer in your garden tools section where it belongs. :-)
Sponsored

 

BrianB

Member
Joined
Sep 15, 2023
Threads
2
Messages
13
Reaction score
24
Location
Pittsburgh PA
First Name
Brian
Vehicle(s)
2020 Mustang GT Premium
Simple /cost effective and Cheap I use it when I rinse and it works great
1698927929311.webp
 

kilobravo

Well-Known Member
Joined
Aug 10, 2019
Threads
95
Messages
8,724
Reaction score
8,807
Location
Corpus Christi, TX
Website
kilobravo.com
First Name
KB
Vehicle(s)
'16 CT6, '18 SD, '20 GT 500
OP: The problem with something like that is, it is only a filter and carbon, so it will only filter sediment and remove some chlorine taste and odor but it won't remove dissolved solids as a softener cartridge would. The filter you have is more for improving drinking water in an RV.

Therefive, if your municipal water is not too hard (TDS) this will help but if you have a high concentration of dissolved solids, (TDS over 100,) you will get water spots if any water is allowed to dry on the painted surfaces.

Softening is the only way to avoid spotting.
 

DFB5.0

Well-Known Member
Joined
Mar 15, 2017
Threads
92
Messages
5,401
Reaction score
15,541
Location
Australia
Vehicle(s)
Mustang GT Fastback
I'm blessed with low TDS town water, so I've never really had the need for a deionizer or filtration system.

After I wash a car, it's driven it under cover, I blow the standing water off the whole vehicle and any remaining water is then mopped up with a towel and drying aid.

Out of curiosity, if you had hard water, would you still need to soften the water if you followed the above procedure?
 

MAGS1

Well-Known Member
Joined
Mar 6, 2020
Threads
96
Messages
11,315
Reaction score
18,539
Location
Somewhere in Middle America
First Name
Mark
Vehicle(s)
2022 Mustang GT
I'm blessed with low TDS town water, so I've never really had the need for a deionizer or filtration system.

After I wash a car, it's driven it under cover, I blow the standing water off the whole vehicle and any remaining water is then mopped up with a towel and drying aid.

Out of curiosity, if you had hard water, would you still need to soften the water if you followed the above procedure?
We have very hard water and I do what you mentioned. No water spots although I do follow up on the windows with a dedicated window cleaner immediately after drying. That’s the one area where I will sometimes get spots.
 

Sponsored

OP
OP
Joker721

Joker721

Well-Known Member
Joined
Feb 28, 2022
Threads
27
Messages
246
Reaction score
307
Location
Henderson, NV
First Name
Jim
Vehicle(s)
01 Bullitt DHG, 2020 Camry WCP TRD
Las Vegas/Henderson has some of the hardest water I’ve seen. I did order the Scott’s sprayer and filled it with 2 gallons of distilled water. It worked well for what it is. It has a battery operated pump but no where near the pressure of a do it yourself car wash or pressure washer.
 
 








Top