Thinking BOOST!

[Leshik]

Hey guys just curious i have A 15 PP 6 manual with 3.73s im thinking of boosting it, but not sure which route to go. I wanna keep my 3.73s. what would be your suggestions? which combos? EXMPL: ProCharger D1s, Holley Manifold, etc...

Sponsored

 

[dubster99]

I wanted to keep my 3.73 too, but it's just too short of a gear. I'm going 3.31 shortly. Paxton, 3.8, E50 tune, Boss manifold, full exhaust. 3rd gear is uncontrollable sometimes on normal street tires.

 

[Crackerjack17]

Pick one, adapt to that setup. What's your goals? How much you wanna spend? You installing yourself?

 

[doodguy]

Keep 3.73 switch to 6060 if manual

 

[Leshik]

Keep 3.73 switch to 6060 if manual

whats a 6060? sorry im new to mustangs

 

[Leshik]

Pick one, adapt to that setup. What's your goals? How much you wanna spend? You installing yourself?

the goal is over 700hp at the wheels. maybe more if building a car, but it has to be street friendly

 

[Leshik]

I wanted to keep my 3.73 too, but it's just too short of a gear. I'm going 3.31 shortly. Paxton, 3.8, E50 tune, Boss manifold, full exhaust. 3rd gear is uncontrollable sometimes on normal street tires.

nice, man ye im already on drag radials they hold really well. for now

 

[Boduke0220]

whats a 6060? sorry im new to mustangs

6 speed out of a GT500, its stronger than the mt82 but geared longer

 

[Leshik]

6 speed out of a GT500, its stronger than the mt82 but geared longer

is it a direct fit?

 

[doodguy]

is it a direct fit?

Yep. I'm right at 900 wheel and car is very street friendly when not wot. Only non after friendly part is 9mpg when on e85

 

[Leshik]

Yep. I'm right at 900 wheel and car is very street friendly when not wot. Only non after friendly part is 9mpg when on e85

LOL got ya thanks for advise, i honestly would love KB, Whipple or VMP supercharger. But i think that the low end torque is too much for street use on a manual vehicle. thats y i need as much advise as i can get.

 

[venumous]

I'm GT350 IM, Headers, D1SC @11psi on pump and made 681 at 17deg timing. I'm sure I'll be at 700whp with the MAK Inlet if it ever ships. Currently tuning for 100 octane. Running stock 3.73s on drag radials with no complaints (haven't tracked it).

 

[Leshik]

I'm GT350 IM, Headers, D1SC @11psi on pump and made 681 at 17deg timing. I'm sure I'll be at 700whp with the MAK Inlet if it ever ships. Currently tuning for 100 octane. Running stock 3.73s on drag radials with no complaints (haven't tracked it).

How it drives on street close to stock?

 

[MyLilPony]

Nitrous, no one really likes their supercharger

 

[venumous]

How it drives on street close to stock?

Oh yeah just like it left the lot outside of the noise, haha.

Sponsored