Texatl
Insensitive jerk
- Thread starter
- #1
Howdy all... I figured it about time to start a build thread. I don't usually do this kind of thing, as I'm typically shy and do what I do just for me... figured usually no one wants to see a bunch of mods others have done.
But then again- I get a LOT from what you all share up. And recently another member here encouraged me to go ahead and do it. So... here we go:
My current is a 2016 Mustang GT 401a Premium Black Accent Package, 6 spd manual, 3.55 gears, navigation, parking assist, and leather.
Summary:
Suspension:
Steeda Progressive Springs
Steeda IRS Sub-Frame braces
Steeda G-trac brace
Eibach sway bars (picked up from member [MENTION=18090]Competition Orange[/MENTION] thank you sir!)
CorteX sway bar end links (picked up from member [MENTION=18090]Competition Orange[/MENTION] thank you sir!)
Ford Racing strut tower and k-brace
Engine/Exhaust:
Steeda oil separator
MBRP Stainless street cat-back
Mishimoto aluminum coolant reservoir
Ford Racing blue coil covers (cuz blue is cool! LOL) :ford:
Exterior:
Performance Pack Wheels and tires ( picked up from [MENTION=28009]Evil 5.0[/MENTION] thank you sir! )
25mm spacers
Steeda Q series Spoiler (painted black) - Update: removed
Classic Design Concepts Outlaw Spoiler (picked up from [MENTION=13665]V8Venom[/MENTION] thank you sir!)
Cervini's front chin spoiler
Ikon Motorsports quarter windows louvers-Update- dr. side removed by speed, pass. side removed by me after :lol:
Ikon Motorsport side winglets
Roush hood scoop
Roush heat Extractors (picked up from [MENTION=16197]mustangr[/MENTION] thank you!!)
Steeda hood strut kit (so awesome of a mod)
Yet to install:
Steeda CAI - enroute now (picked up from [MENTION=15869]EFI[/MENTION] thank you sir!)
GT350 Intake manifold (from [MENTION=9199]LevittownFordParts[/MENTION] thank you) and Blowfish TBA2 throttle body adapter (to use stock 80mm TB)
Steeda clutch spring and perch
SCT x4 tuner and considering who to tune with...
Future/want list:
Brembo PP brakes and stainless steel lines
Steeda bump steer kit
Vertical Links (not sure whose yet- many to choose from, all seem very similar)
Long tube headers (those are damn expensive too LOL)
Current pic:
So many people, vendors, and groups have been huge helps along the way and I'll share that in upcoming posts. Hopefully I can keep ya'all interested.
I want to see how much reasonable power can be made in a N/A build using the GT350 manifold, stock TB, CAI, Long Tubes, etc... before succumbing to the FI route LOL. I don't think it'll can make as much as a CJ intake would, but it will be fun seeing where we can go with a streetable build.
Thanks for getting this far.
But then again- I get a LOT from what you all share up. And recently another member here encouraged me to go ahead and do it. So... here we go:
My current is a 2016 Mustang GT 401a Premium Black Accent Package, 6 spd manual, 3.55 gears, navigation, parking assist, and leather.
Summary:
Suspension:
Steeda Progressive Springs
Steeda IRS Sub-Frame braces
Steeda G-trac brace
Eibach sway bars (picked up from member [MENTION=18090]Competition Orange[/MENTION] thank you sir!)
CorteX sway bar end links (picked up from member [MENTION=18090]Competition Orange[/MENTION] thank you sir!)
Ford Racing strut tower and k-brace
Engine/Exhaust:
Steeda oil separator
MBRP Stainless street cat-back
Mishimoto aluminum coolant reservoir
Ford Racing blue coil covers (cuz blue is cool! LOL) :ford:
Exterior:
Performance Pack Wheels and tires ( picked up from [MENTION=28009]Evil 5.0[/MENTION] thank you sir! )
25mm spacers
Steeda Q series Spoiler (painted black) - Update: removed
Classic Design Concepts Outlaw Spoiler (picked up from [MENTION=13665]V8Venom[/MENTION] thank you sir!)
Cervini's front chin spoiler
Ikon Motorsports quarter windows louvers-Update- dr. side removed by speed, pass. side removed by me after :lol:
Ikon Motorsport side winglets
Roush hood scoop
Roush heat Extractors (picked up from [MENTION=16197]mustangr[/MENTION] thank you!!)
Steeda hood strut kit (so awesome of a mod)
Yet to install:
Steeda CAI - enroute now (picked up from [MENTION=15869]EFI[/MENTION] thank you sir!)
GT350 Intake manifold (from [MENTION=9199]LevittownFordParts[/MENTION] thank you) and Blowfish TBA2 throttle body adapter (to use stock 80mm TB)
Steeda clutch spring and perch
SCT x4 tuner and considering who to tune with...
Future/want list:
Brembo PP brakes and stainless steel lines
Steeda bump steer kit
Vertical Links (not sure whose yet- many to choose from, all seem very similar)
Long tube headers (those are damn expensive too LOL)
Current pic:
So many people, vendors, and groups have been huge helps along the way and I'll share that in upcoming posts. Hopefully I can keep ya'all interested.
I want to see how much reasonable power can be made in a N/A build using the GT350 manifold, stock TB, CAI, Long Tubes, etc... before succumbing to the FI route LOL. I don't think it'll can make as much as a CJ intake would, but it will be fun seeing where we can go with a streetable build.
Thanks for getting this far.
Sponsored
Last edited: