Steeda's Race Car Development - Build Thread

[TeeLew]

I'm not sure if you've covered this. What tires are you running & what are your tire rules? Have the rules influenced your choice?

Sponsored

 

[WildHorse]

Read all 25 pages.. simply awesome!

 

[SteedaTech]

We will update the build list shortly. We run the MCS dampers front and rear. The dampers are engineered to our specs .

Yes we are running the MCS Dampers front and rear with our Steeda dual rate springs in the rear. Currently we are running a 300lb/in on the front.
Steeda Tech

 

[SteedaTech]

I'm not sure if you've covered this. What tires are you running & what are your tire rules? Have the rules influenced your choice?

We run 315x30x18 with a 18x11 rim front and rear . We run Hoosier tires. The rules do not influence our choice
Thank you,
Steeda Tech

 

[SteedaTech]

New transmission for the 20 car. We will being doing a upgrade to 2018 plus video.

Special thanks, goes to McLeod Clutch for support of the 20 car. We are excited to try this new clutch and flywheel out?

 

[SteedaTech]

The number 20 car on our new state of the art Alignment machine! Just test drove with the new Mcleod clutch feels great, grabs a little closer to the fire wall .

 

[fatbillybob]

We run the MCS dampers front and rear. The dampers are engineered to our specs .



Yes we are running the MCS Dampers front and rear with our Steeda dual rate springs in the rear. Currently we are running a 300lb/in on the front.

We run 315x30x18 with a 18x11 rim front and rear . We run Hoosier tires. The rules do not influence our choice
Thank you,
Steeda Tech

Are you able to run -3 degrees Or more negative front camber on that setup without playing with spindle camber bolts?

 

[SteedaTech]

Are you able to run -3 degrees Or more negative front camber on that setup without playing with spindle camber bolts?

Yes we are. You can run up to approximately -3.5 with the Steeda Camber Plates. Provided you enlarge the strut mount opening.

Steeda Tech

 

[Shifterracer]

what rims are you running on the # 20 car? i dont see them on your site.

are you able to get the mcs coilovers for the gt350?

 

[Shifterracer]

ah thank you!

 

[SteedaTech]

New product for Racers from Steeda, steering rack limiters.
https://www.steeda.com/steeda-555-8602-s55-steering-rack-limiter-stops

 

[Kermitz]

Special thanks, goes to McLeod Clutch for support of the 20 car. We are excited to try this new clutch and flywheel out?

What are the specs on this clutch? Which one would you recommend for an 18+ that sees track day / HPDE use?

 

[SteedaTech]

We will be testing the Mcleod in a few weeks on track and report back. We have used the production clutch on our 2018 HPDE for two years no problem.

Thank you,
Steeda Tech

 

[SteedaTech]

Steeda's new dyno lab. Getting ready for Sebring in a few weeks.

Sponsored