Steeda CAI Review and Install Notes:

[Jeffy_2010]

Gotta get some red oil or a new filter

Sent from my iPhone using Tapatalk

Powdercoat looks good on the MAF! Definitely need a red filter tho

Sponsored

 

[stoli]

Powdercoat looks good on the MAF! Definitely need a red filter tho

It's just some vinyl wrap I had laying around... Freebie!

 

[Jeffy_2010]

It's just some vinyl wrap I had laying around... Freebie!

Even better! Lol

 

[Need 4 Steed]

Stoli, what vinyl did you use


Sent from my iPhone using Tapatalk

 

[ero 5.0]

I do a lot of powder coating, but mostly smaller items. Lots of jigs and fishing lures. I was going to the steeda, but didnt has a fluid bed quite big enough. Looks real good though.

 

[Ryubb]

Thanks to David at Steeda, I got my steeda CAI early this week and finished installing about 30 mins ago. Disconnected ground during install. Not gonna lie, it was a pain in the butt to do (3 hours), however both Pops and I are more technically than mechanically inclined.

That said, started up the car (PoPs came over and helped me since he has more tools). He was blown away by the sound. If I roll down the window I can tell or get on it I hear the pitch/roar. Very nice indeed, and sounds like my exhaust is louder too?

Yes, I can feel and tell the difference, I was wheel hopping in 3rd gear which i didn't do before, kinda surprising actually(good way).

Very impressed and appreciate David at Steeda for his help.

On Monday I'll be installing my BMR Cradle lockout CB005. See how well it helps with the bouncy ride/wheel hop.

 

[stoli]

Stoli, what vinyl did you use

3m 1080 gloss black.


Sent from my iPhone using Tapatalk

 

[Need 4 Steed]

Thanks


Sent from my iPhone using Tapatalk

 

[Knight5.0]

Is this cuppler supposed to be this much bigger than the MAF housing??


Sent from my iPhone using Tapatalk

 

[mustang_guy]

Just tighten it down well. Itll be fine.

 

[Knight5.0]

Just tighten it down well. Itll be fine.

Ehhhh. Well the couplers are what they were waiting on to ship. I'm glad I got it early!!! Thanks [MENTION=10893]David@Steeda[/MENTION]


Sent from my iPhone using Tapatalk

 

[stoli]

Is this cuppler supposed to be this much bigger than the MAF housing??


Sent from my iPhone using Tapatalk

Mine was...


Sent from my iPhone using Tapatalk

 

[Cascadia_302]

Mine were actually pretty darn tight and took a bit of muscle to get on, for me the box seal was easier to install.

 

[Knight5.0]

Intake installed and re flashed with my new Lund tune. It idle's and rev's smooth. Will drive and take a data log or two when the ball game is over. I did notice it fits tight against the hood tho. It doesn't appear to keep that side of my hood lifted , but it is a lot harder to close the hood now.


Sent from my iPhone using Tapatalk

 

[stoli]

Will drive and take a data log or two when the ball game is over.

It's over. lol

:cheers:

Sponsored