Starting the twin install...

[Kryckter]

I did make some progress last night...

Not much to see since it was mostly electrical last night. Here is the controller mounted.

Got the new base E85 tune loaded, car started, leak tested and driving!

Such a weird AFR

I did some logging last night and will be working with the tuner today getting it a little closer to dialed in.

More parts are showing up...

I hope to get the tune dialed in within the next week and then hit the dyno within a week or two

Sponsored

 

[Poisond281]

Lookin' good!! Can't to see the numbers once the data logging and additional tuning is complete.

 

[gqneon]

Any issues starting the car when it's hot or cold? Any idle issues? Curious because my base time was so awful at idle and hot starts. But it felt great midrange and top end. Seeing 8's on AFR is alarming for a second then it's kind of cool

Sent from my SM-G925T using Tapatalk

 

[ozracer]

wow cant wait to see this dip into the 10s

 

[Kryckter]

Any issues starting the car when it's hot or cold? Any idle issues? Curious because my base time was so awful at idle and hot starts. But it felt great midrange and top end. Seeing 8's on AFR is alarming for a second then it's kind of cool

Sent from my SM-G925T using Tapatalk

No issues with hot or cold start. It actually starts better than my pump gas tune...

 

[Kryckter]

I got the driveshaft in last night. Getting an H-Pipe built up today. Then I just have to finish getting the tune dialed in and I will get it back on the dyno!!!

 

[Process]

Be prepared to see a stoich of 9.85 and WOT in the high 7's

 

[Kryckter]

Be prepared to see a stoich of 9.85 and WOT in the high 7's

Its pretty awesome. I did some WOT logs today on E85. My 7lbs of boost now feels better than my 10lbs on pump gas did!

Just getting started on the tune and its great to see 19 degrees of timing with NO knock!!!

 

[Jewishthunder]

How'd you get boost to show in your dash readings near IAT and CHT?

 

[Kryckter]

How'd you get boost to show in your dash readings near IAT and CHT?

Non-PP cars have that in their display for some reason. Its not really accurate though...

 

[Jewishthunder]

Non-PP cars have that in their display for some reason. Its not really accurate though...

Weird! I figured it wouldn't be super accurate, just thought I was missing something.

 

[Kryckter]

Just got done on the dyno. Great day on the dyno! It really needs to see a load dyno as it is not getting enough load up top to keep going... Regardless its making some power!!! I will get a video edited and uploaded soon

13lbs - 806rwhp / 786rwtq
8lbs - 675rwhp / 651rwtq

 

[John S.]

Awesome! That's a beast.

 

[esacteksab]

Congrats! That torque is amazing! Any intentions of drag racing it?

 

[z06psi]

Awesome numbers! These cars are so weird. I would have thought torque would have came in earlier. And then on mine I would have thought it would have came in later. Cam timing is so huge with these cars.

Sponsored