SP083 Alignment Specs

[KingBowser]

2019 PP1 car lowered on BMR Handling SP083 with 19x10.5+32 Squared 285/35. Would the BMR Specs still be good for this setup or what should I change, I have camber bolts in the front and have the M-5A460-M Toe Bearing as well. Car is daily driver and sees the drag strip with occasional track days, I understand there isn't a perfect alignment for all three but an aggressive street handling is what I'm looking for.
Thanks in advance!

Sponsored

 

[Brian@BMVK]

I would go up to -2.0 front camber, 0.00 toe, and -1.7 for rear camber. Rear toe specs there are good.

 

[chowman90]

Would these specs be good for the SP080?

 

[Brian@BMVK]

Would these specs be good for the SP080?

Listed specs in the picture would be recommended for a street (no track intention) alignment.

Sponsored