Rokblokz Mud Flaps - MACH 1

[12g]

Anybody know which Rokblokz Mud Flaps fit the Mach 1 in the rear?

Sponsored

 

[hbash]

Anybody know which Rokblokz Mud Flaps fit the Mach 1 in the rear?

They look like they're huge.

 

[Geosh]

They look like they're huge.

They blend in nicely actually.

 

[JuicySmollet]

I looked at the GT500 mudflaps last night, they look really good, probably ordering them.

 

[12g]

I looked at the GT500 mudflaps last night, they look really good, probably ordering them.

Could you please supply the link.
Are we talking rears only.
Thanks

 

[dhborden]

Do we have any confirmation how they fit on the Mach 1?

 

[Bikeman315]

Do we have any confirmation how they fit on the Mach 1?

You might want to touch base with them.

This is all they show on their website. I'm thinking the GT500 folks are using the GT350/350R. They also do not offer the rears separately.

https://rokblokz.com/collections/fo...gt-splash-guards-15-17?variant=11136303956011

 

[dhborden]

You might want to touch base with them.

This is all they show on their website. I'm thinking the GT500 folks are using the GT350/350R. They also do not offer the rears separately.

https://rokblokz.com/collections/fo...gt-splash-guards-15-17?variant=11136303956011

Yep, saw that. Given the Mach 1 has the GT body with external parts from the 350 series, I want to know before I make any orders. I don't plan on racing, but it would be nice to know how much disruption they cause to the designed airflow, similar to the question on another thread about opening up the hood vents (so far the consensus is "don't do it".) I mention this because even if I only HPDE track the car, I do not want to disrupt any of the favorable airflow (for cooling or downforce) while I'm out there pushing it.

 

[hbash]

Yep, saw that. Given the Mach 1 has the GT body with external parts from the 350 series, I want to know before I make any orders. I don't plan on racing, but it would be nice to know how much disruption they cause to the designed airflow, similar to the question on another thread about opening up the hood vents (so far the consensus is "don't do it".) I mention this because even if I only HPDE track the car, I do not want to disrupt any of the favorable airflow (for cooling or downforce) while I'm out there pushing it.

I sent them email about flaps for the Mach 1. They said they don’t know as they don’t have a Mach 1. Said they’ll let me know when they know.

 

[12g]

I sent them email about flaps for the Mach 1. They said they don’t know as they don’t have a Mach 1. Said they’ll let me know when they know.

Done all that with Rokblokz, I have been communicating with them since 5 November 2020 and still no fitment for the Mach1.
Fitment for the front will be the same as a GT, the rears are where the problem will be.

 

[cactus_kid]

I did not order them this time around. One has to drill holes to mount them. That isn't going to happen on the Mach 1

 

[hbash]

I did not order them this time around. One has to drill holes to mount them. That isn't going to happen on the Mach 1

Are you sure it doesn’t come with holes for flaps?

 

[JuicySmollet]

Could you please supply the link.
Are we talking rears only.
Thanks

Yes rears only...I was looking at a completely stock GT500 and comparing it next to my M1...it had the same body aero kit below, so I'm not sure why it wouldn't fit.

 

[12g]

Yes rears only...I was looking at a completely stock GT500 and comparing it next to my M1...it had the same body aero kit below, so I'm not sure why it wouldn't fit.

Great!!!
Do you have the part number?
Now thinking:
Front Rokblokz
Rear GT500

 

[JuicySmollet]

Great!!!
Do you have the part number?
Now thinking:
Front Rokblokz
Rear GT500

See this post:

https://www.mustang6g.com/forums/th...-lip-molding-part-number.158533/#post-3229273

Sponsored