mali321
Active Member
- Joined
- Feb 14, 2021
- Threads
- 3
- Messages
- 28
- Reaction score
- 13
- Location
- Chicago, IL
- First Name
- Mir
- Vehicle(s)
- 2019 Mustang GT 301A
- Thread starter
- #1
Hello all!
I originally intended this to be to Kelly @BMR Tech , but it wouldn't let me start a private conversation. Below is my issue and description. There's a clanking noise that comes from the rear passenger side, and I'm wondering if it has something to do with the CB005 kit (I switched all other components from left to right and the sound stays on the right side). Besides CB005 the other mods are BMR upper control arms (UCA762), BMR Sp083 Handling springs, and Bilstein shocks. Car is 2019 GT non-PP. No upgraded sway bars or end links though everything is torqued to spec. Although full disclosure, I wasn't able to clock the 2 inner control arm bolts (forward and rearward)....could that be it? Ran out of time since it requires removing the exhaust.
Thanks for your help guys!
(Message to Kelly)
Hi Kelly! My name is Mir; I read a lot of your posts on the forum and your insight is always most valuable! For example the post about clocking the bushings; I have done that thanks to your post and photos!
I have a question about a noise I'm hearing in the rear passenger side, like a loose metal clanking sound. And it appears to happen during rapid ups and downs with the rear right wheel. I've changed out many parts to isolate the problem and I still have the sound.
Anyway I wanted to ask if this CB005 kit looks fine to you on both left and right sides. On the left side the brace does not sit up flat against the subframe. I've reinstalled it many times over the course of a few months and it always sits like this. I wonder if it not being flat is causing the subframe to move on the other side, somehow.
Thanks for any suggestions!
I originally intended this to be to Kelly @BMR Tech , but it wouldn't let me start a private conversation. Below is my issue and description. There's a clanking noise that comes from the rear passenger side, and I'm wondering if it has something to do with the CB005 kit (I switched all other components from left to right and the sound stays on the right side). Besides CB005 the other mods are BMR upper control arms (UCA762), BMR Sp083 Handling springs, and Bilstein shocks. Car is 2019 GT non-PP. No upgraded sway bars or end links though everything is torqued to spec. Although full disclosure, I wasn't able to clock the 2 inner control arm bolts (forward and rearward)....could that be it? Ran out of time since it requires removing the exhaust.
Thanks for your help guys!
(Message to Kelly)
Hi Kelly! My name is Mir; I read a lot of your posts on the forum and your insight is always most valuable! For example the post about clocking the bushings; I have done that thanks to your post and photos!
I have a question about a noise I'm hearing in the rear passenger side, like a loose metal clanking sound. And it appears to happen during rapid ups and downs with the rear right wheel. I've changed out many parts to isolate the problem and I still have the sound.
Anyway I wanted to ask if this CB005 kit looks fine to you on both left and right sides. On the left side the brace does not sit up flat against the subframe. I've reinstalled it many times over the course of a few months and it always sits like this. I wonder if it not being flat is causing the subframe to move on the other side, somehow.
Thanks for any suggestions!
Sponsored