Race Brake Backing plates

[S14Wolf]

I'm looking for a backing plate that will allow a 3" ish brake duct hose to be attached with the pp2 brembo calipers. I'm running the steeda two piece rotors. Any recommendations? Also does any one have pictures of how you ran your brake duct hoses. Would a naca duct on the underneath of the front tray work or would you place it through the front bumper and if so where?

Sponsored

 

[KewlWinter]

Here is a link to backing plates that should work.

 

[NightmareMoon]

I have a JLT kit which came with (I think) that sized hose.

however, my advise is to skip that route and go get the Vorshlag big deflector plates for the control arms instead. They work better than ducting, and basically hassle free, unlike ducting which is always getting crunched between the wheel, control arms, frame, and fender liners. There really isnt space. But I digress, the deflector plates cool better when combine with PP1/2 undertrays. I switched from ducts to the deflectos and never looked back.

Sponsored