Search results

Based on how As-Built data blocks known mappings have changed from the 2015-17 for 2018+ and then again somewhere in the 2021+, it is entirely possible that when Ford updated the underlying module software that they left out some conditional branch checks or they were still addressed to old data...

Covercraft for the reasons stated previously.

Go with a square setup, as much wheel as you can fit under, since you mentioned track and cornering. Running a staggered setup is better for straight line. The most aggressive square setup I have personally seen was 19x11.5 et56 with a 31mm spacer up front. Or you can go 19x11 et52 with a...

Also check the sway bar end links to ensure they aren‘t loose, bent, or bad joint. I had one that was snug, but not torqued down that made clunk noises, especially under load cornering or variable surfaces. Drove me crazy trying to figure it out.

Here are my calipers painted blue w/clearcoat waiting on wheels to install.

CyanLabs for the win. Their updater takes the guesswork out of it and even has an ” interrogator” feature to query your SYNC system to determine versions and problems. I just updated my SYNC to 3.4.23188 and maps to 2.22 (2022) today using their updater.

Ford stopped including the 2.3L EcoBoost engine cover starting in 2021 MY, with the exception of the HPP models. When I traded my 2018 in for my 2022, I forced the dealer to swap it over as part of the deal. This is nothing more than Ford saving $ on what they consider a cosmetic not critical...

The APIM can be replaced and the programming restored from downloaded ASBUILT data specific to your VIN. It will require Forscan, but the procedure is no different than what is performed when upgrading a 4” to 8” SYNC system. You can find non-nav APIM’s used pretty cheap and even the nav...

I've run the G2's and the Firehawks. Here in Florida, the G2's sucked in the rain while the Firehawks performed well. When it rains practically every day in the summer (and lots of other days too) and the car is your daily driver, the last thing you want is to break loose in congested traffic.

When I installed the CVF downpipe to my 2018, I elected to mate it to the MBRP 3" catback exhaust. I used the CVF 3" to 3" adapter, purchased a V-Band clamp, and welded it in as the mating point between the adapter and the MBRP exhaust. Ran that setup for almost 3 years before I traded the car...

Here is a link to backing plates that should work.

That looks like a magneride setup. I see the coil springs are wound opposite and the shocks have wires at the top. Is the lower control arm compatible with a non-magneride spring?

You will need at a minimum, the bezel, APIM, 8" screen, and ACM. If your car is not a premium, then likely you will also need an adapter harness to go from the base 4.2" setup the car used to have to the premium 8" setup. That 8" screen in your pics is part of that aftermarket radio and not...

I used it for the dual VIAIR compressors, manifold/ECU, and tank for my Air Lift 3H system.

Here are the wheel stands I designed and built.

The other issue I have personally experienced (not just Steeda) mentioned in this thread is available inventory. If the inventory is not in-house and is either drop ship or stock on demand, basically dependent on another vendor, then it should be flagged as such. Nothing worse than having your...

I just had a negative shipping experience with FedEX from Steeda. Ordered front lower control arms and scheduled delivery was for Monday, 11/1/2022. Wife was home all day and they never rung the doorbell. When I checked the tracking after I arrived home from work, it said "Delivery Exception...

Should work fine. Very similar in function to the full kit I posted earlier.

The modem in the car has to be activated with AT&T cellular services. In effect, it is the equivalent of a cellphone. The initial 3 month promo based on the 2gb data plan is ok for what it is, but isn't sufficient if you start pulling a lot of data through that connection. I opted to upgrade...

Thats a nice piece, but unfortunately I can't justify the cost as I'm setup for road performance.