Just got a update pic from pristine auto, her annual touch up of ceramic pro is done! Cant wait to go and get her!!
The tires are cont dw06 stock sizes on stock wheels with no spacers. I am lowered on bmr sp080 springs. I'm not running a lot of neg camber so that makes the top of the tires set out towards the fenders.wow!...what size are the wheels and tires?...stock?...spacers?
It looks like you have a square fit. Can you give me the size numbers of the wheels and tires?The tires are cont dw06 stock sizes on stock wheels with no spacers. I am lowered on bmr sp080 springs. I'm not running a lot of neg camber so that makes the top of the tires set out towards the fenders.
255/40/19 on 19x9 and 275/40/19 on 19x9.5It looks like you have a square fit. Can you give me the size numbers of the wheels and tires?
Great look great stance. I wish Ford made those wheels in a 19x10 square fit.
Do you have a side shot?255/40/19 on 19x9 and 275/40/19 on 19x9.5
Or like this?
I bought my foundry wheels used. I'd have to do a search for offsets both pp n foundry wheels but I can tell you they fit perfectly even on a PP car with brembos without spacers!Hi Braski thanks for sharing your build. I like the Foundry wheels too, but here in Australia we only get black mesh wheels and Brembos. From what I've seen the Foundrys are an oem fitment over there, would that be correct? Do you know how the offsets compare between the two types, and did you need spacers to clear the Brembos? Appreciate any advice you can send my way as I could try to source some used.
For the most part bmr springs have a rake to them. How ever mustangs are made by Ford and the amount of rake will vary from car 2 car or even passenger side to driver side. Ford actually has a tolerance for this. I believe my car especially being a 2015 has more sag in the rear end especially on the driver side than most 6g cars. My car sits pretty even compared to most bmr set ups. I'd actually prefer a bit more rake. I will try to take some photos for you but it really all depends on the car. There is a hole thread on bmr stance in the suspension thread. Personally anything other than bmr will give you the saggy rear end stance.how about a level full side shot close up?