Procharger D1X 2015 GT

[ProChargerTECH]

Thanks for f ing up this VERY informative thread ladies. Lol.

Anyways seems like I got things sorted out with my car. It was absolutely in the trans tune. Took it to the track tonight and the car did perfect! It did exactly what I thought it should. Unfortunately the guy that did my trans didn't tighten my xpipe bolts so the exhaust came disconnected after the 1/8th and I got out of it on this pass. The only other pass the car spun but went 148 mph and I probably didn't get on it until after the 60. Can't wait to start tweaking the car now. This is definitely an 8.80 car easily.

Congrats on this pass!!!! Seriously I am jelly!

Sponsored

 

[S550_LGND]

Who know what that tackiness is, i would have guessed anti seize. Keep us posted if the new plugs and tighter gap clears up the issue.

Power depends on what the engine build is. Mine on d1x and 4.0 made over 1100. But my engine build is fairly robust.

What belt size are you running with a 4.0 pulley ? Been trying to find info on it but no one has been able to answer me lol

 

[Leonidas514]

K080661 Gates

 

[S550_LGND]

K080661 Gates

How much boost are you seeing? I’m about to throw on a 3.9” pulley on my D1X and want to know around how much boost should I be expecting? I have free flowing exhaust and a 2018 intake manifold with ID1300 and Fore fuel system on E85

 

[Leonidas514]

18lbs

 

[80FoxCoupe]

How much boost are you seeing? I’m about to throw on a 3.9” pulley on my D1X and want to know around how much boost should I be expecting? I have free flowing exhaust and a 2018 intake manifold with ID1300 and Fore fuel system on E85

3.9 with an 8in crank pulley is gonna make mega power

 

[80FoxCoupe]

What engine rpm? If you only spin the engine to 2k then not much boost, but if you spin it to 9k then alot of boost. Help us help you.

 

[S550_LGND]

What engine rpm? If you only spin the engine to 2k then not much boost, but if you spin it to 9k then alot of boost. Help us help you.

Gonna Spin it to About 7.6K Rpm & I Also Have The ATI 6.78” Super Damper Crank Pulley I don’t Know If That Makes A Difference Lol

 

[S550_LGND]

I Also Have stage 2 Comp Cams Blower Cams

 

[80FoxCoupe]

Gonna Spin it to About 7.6K Rpm & I Also Have The ATI 6.78” Super Damper Crank Pulley I don’t Know If That Makes A Difference Lol

So your kit is stage 1 drive?

 

[S550_LGND]

So your kit is stage 1 drive?

No, Stage 2 8 Rib.

 

[SolarFlare]

I use a k08655rpm with a 4.0 pulley on a gen 2.

Sponsored