bruhh
Active Member
- Thread starter
- #31
I consulted Paul@PKAuto and spent hours researching this setup, I definitely did not just buy it. The camber needed to get under the fender is between -2.2 to -2.5 with this setup and I was told no modification is needed to get that much negative camber.To get under the rear quarter, you need an offset of around +43 to 50 for a 10.5" wheel. My 19x11 +50 rears are just barely under and that's because I have -2.0 deg rear camber (for autocross/track use). Best to consult people for what works before just buying stuff...
Sponsored