help

Questions guys so I accidentally pulled these two wire out. Still has the pin on them. Can I just simply push them back into the connector and move on?

Hi, i have a 2017 gt & all of a sudden having issues with my door being “ajar” even when shut completely. i was trying to fix my tweeters at the factory amp in the driver kick panel & when all was said and done, started the car and dash just says “driver door ajar”. the window opens and closes...

I installed Steeda Progressives, FP Track shocks/struts, camber bolts, Steeda IRS alignment kit, and 1” spacers on my 2019 GT. Two days later got an alignment. Three days after that, I started to hear a clicking/ticking noise from the rear every time I go over a bump. Cannot replicate on...

Attached is a picture of the current wheel fitment. It is 275/35 r19 9.5" width front, 295/35 r19 11" width back. I am about to get wheel the same width as the front to do 275 all round because I'm dailying it and would like to save some money on tires as the current stance is really pricy to do...

I have a 2019 GT and a month or two ago, I started to notice my idle becoming very rough at red lights. Sometimes the RPM would drop by 50-100, sometimes it would be more dramatic and drop 200-300. Yesterday, it actually stalled. I can tell my friends i am so bad at driving, that i stalled an...

Hi all, it’s been about two weeks since I installed OPGs on my 2015 Mustang GT with a ESS G2 supercharger. Excellent oil pressure, oil capacity is mint. no bogging, no issues. however, i did notice this strange noise coming from either the pulleys or the motor. I’ve attached the video, it...

So, I’m looking at this 2016 Mustang GT, which was side swiped and written off and is now up for auction in a few days. It has 80k miles and during the 9 years it had 5 owners. How big of a red flag if any is this ? Service records seems pretty good. I also added carfax

Hey everyone, I’m working on my 2015 Mustang GT and I’ve run into some serious timing issues. I could really use some advice. Here’s what’s happening: I was trying to install the primary timing chain (crank sprocket to cam phaser). For some reason, the timing marks on the cam phaser were...

Hey so I have fiends car that give maintance, a gen3 coyote mustang 2019 and we are having some problems and wanna ask if someone here has ever have this problem. The car temperature while you cruise o have normal drive it’s always good between 195 en 208 f but as soon you give WOT the car raise...

Hey, I got a 23’ gt. It’s only got headers, e-85 and tune but I’m gettin a lot of backfire at low rpm after de acceleration. I went side exit and I’m wondering if rob’s tune could play into that at all ? It’s been tuned by the previous owner and all I get thru scanning is p0172 also it is...

Hi all, Recently my gen 3 block seized in a 2020 mustang gt with the 10r80 transmission. I took out the engine and opened it up and I believe that the car swallowed in someway 7 quarts of oil and spun rod bearings. The oil pan ended up with rod bearings shavings and the vct Solenoids and even...

Hey everyone, I had the unfortunate experience of getting in an accident. Coming home late from a bar.. sober.. and hit one of those concrete islands in the median about 6 inches tall going 35. Front left wheel took the impact and it looks pretty bad. Does anyone know if insurance would total...

Hello, New member here. I am looking for which service department is best near me for warranty work. Yes yes I know independent shops are the best (And yes I have one and do my own work at times), but I have a ford gold warranty that they extended out and want to use it up first. Anyone have...

Hey everyone I’m looking at the Borla stak exhaust with the y pipes and wondering how I make it work my y pipes are currently welded on to the stock exhaust but clamp of to the bullet resanators the kit I’m looking at has the y pipe but there’s no hole it looks like for the 02 sensors so not...

Hello I recently tried switching back to a Ford Performance Gen 3 5.0L Coyote Intake Manifold after taking a CJ out. I just ran into a couple issues with trying to return back to stock. Does anyone have or know where to connect all the hoses. Could you make a quick but detailed video on where...

Hey guys, I’m very new to this platform and just wanting to get clarification on what I can deem as normal in my car and kind of just forget, but also wanting to make sure there’s nothing I’m doing that’s seriously wrong. It’s my first manual and I’ve gotten to a point where I’m not stalling at...

First post so hopefully I’m in the right thread. Recently after putting on my Lund tune (which I doubt has anything to do with this) I noticed some creaking coming from my driver side suspension? I’m not entirely sure. I only hear the creaking when I’m in reverse, taking off in first, and...

Hey, Have the Lund NGauge and accidentally pulled the odb plug out last week reaching for the hood lever. When i went to go n reconnect it, the first light turned on (green light) and was just flashing with no splash screen - played around with it for about 15-20 min and the splash screen...

Hi everyone! Looking for some help on a rattling noise. I have a 6-speed 2015 GT premium w/ PP. Two days ago I was picking something up and as it was just sitting idling it started making a loud rattling sound coming from the engine area. Not really sure if it’s coming from back or front since I...