Modifying As-Built Data Guide

[papinist]

I'm looking to increase the "tap to blink" to a higher number of blinks from 3 to 5 and also a touch to lock 'honk' since in the day time I can't tell if it locks and I can't see the lights flash or hear any locking happen with the noise around me.

I guess I'm requesting to add this to the list of requests.

I'm still searching for this info since for EU cars is rare to have a lock 'honk'. So the US Mustang does not honk when locking\unlocking? Neither with remote nor touching the handle? When I was in the US seems to me that every car is honking when locks\unlocks and I thought that also the Mustang is doing that.

Sponsored

 

[Kahboom]

single lock press on the remote just locks the doors, quick double press of the lock button on the remote locks the door and honks the horn once and flashes the lights to let you know that the alarm is on and has been set. this is for US model cars.

 

[John577]

I'm still searching for this info since for EU cars is rare to have a lock 'honk'. So the US Mustang does not honk when locking\unlocking? Neither with remote nor touching the handle? When I was in the US seems to me that every car is honking when locks\unlocks and I thought that also the Mustang is doing that.

I have it now on my car. When I lock it twice with the fob, the car honks

 

[John577]

single lock press on the remote just locks the doors, quick double press of the lock button on the remote locks the door and honks the horn once and flashes the lights to let you know that the alarm is on and has been set. this is for US model cars.

Yes, it's a standard features on the US cars and can be activated on the EU model as well with Forscan :cheers:

 

[pardoneo]

Yes, it's a standard features on the US cars and can be activated on the EU model as well with Forscan :cheers:

NICE!!

How? :cheers:

I think you might have found something new.

Mine looks like this

I'm missing the obstacle detection on the camera feed, I do have obstacle detection on the car icon.

My PAM looks the same as yours, so the difference might be on the APIM.

Could you please share:

7D0-01-01
7D0-02-01
7D0-04-02

Thank you.

Any update on this "obstacle detection" in Sync2?

 

[papinist]

I have it now on my car. When I lock it twice with the fob, the car honks

Yeah I remember we discussed about that but asked again just to be sure ;)

 

[John577]

NICE!!

How? :cheers:

Like this :cheers:

Door Lock Horn Honk (2x Press on Fob)

(BdyCM)
726-38-02 xxxX xxxx xxxx
1 (Enabled)
0 (Disabled)

I can also confirm that this works on our EU cars :

Double Horn Honk Reminder (Engine on, Keyfob not in car):

Code: 726-41-02 0001 0001 0072 - Enabled
Change To: 726-41-02 0000 0001 0071 - Disabled

 

[pardoneo]

Like this :cheers:

Door Lock Horn Honk (2x Press on Fob)

(BdyCM)
726-38-02 xxxX xxxx xxxx
1 (Enabled)
0 (Disabled)

I can also confirm that this works on our EU cars :

Double Horn Honk Reminder (Engine on, Keyfob not in car):

Code: 726-41-02 0001 0001 0072 - Enabled
Change To: 726-41-02 0000 0001 0071 - Disabled

Hmmm interesting....I´ve got a 2 in that X position...

726-38-02 6002 0100 00CA

 

[John577]

Hmmm interesting....I´ve got a 2 in that X position...

726-38-02 6002 0100 00CA

Now I have this and it works :

 

[pardoneo]

Now I have this and it works :

Will try as soon as I get my hands on a OBDlink MX :frusty: :frusty: :(

thank you! :cheers:

 

[TexasRebel]

I'm looking to increase the "tap to blink" to a higher number of blinks from 3 to 5 and also a touch to lock 'honk' since in the day time I can't tell if it locks and I can't see the lights flash or hear any locking happen with the noise around me.

I guess I'm requesting to add this to the list of requests.

These two things are not as-built changes, but complete reprogramming.

As-built modifications simply change how the vehicle uses existing code within the modules. You cannot make a vehicle run code that doesn't exist.

 

[db252]

I'm looking to increase the "tap to blink" to a higher number of blinks from 3 to 5 and also a touch to lock 'honk' since in the day time I can't tell if it locks and I can't see the lights flash or hear any locking happen with the noise around me.

I guess I'm requesting to add this to the list of requests.

These two things are not as-built changes, but complete reprogramming.

As-built modifications simply change how the vehicle uses existing code within the modules. You cannot make a vehicle run code that doesn't exist.

Ok but I find that strange. I have been able to change the blinking amount on all my other cars (BMW, VW) using vagcom and mycarly. Seems like this would be the same as all the other parameters being changed by forscan but I really don't know. Thanks for the feedback. I guess touch to lock honk is a no go to. Damn.

 

[mustank]

I am hoping that the base radio low line out gets confirmed. I was set on the OEMradio programmer to just get it done easy, but it looks like I am going to end up trying this forscan.

Also, the two lists have different locations for the startup screen.

Whoever owns the lists should identify which changes are verified and also for which model/trim of mustang/equipment.

 

[Reds197]

I need to change axle ratio (726-12-01). I do not get an option to just write that single item. Do I hit write all if I have made no other changes in order for it to work?

 

[ohbuckeyes]

To those with an ecoboost who tried to enable line lock, are you now getting faulty engine codes? I keep getting a code for a leak by the throttle and intake but there is not actually a leak...

Sponsored