Grille options

[Adr2600]

Looking for grille options for stock gen 3 bumper that utilize the GT350 style badge. Anything OEM?

Sponsored

 

[MAGS1]

This guy makes good stuff. I have the red badges (not installed yet). Had them on my 2016 also

https://www.ebay.com/itm/1841122956...BGkDMlHSGq&var=&widget_ver=artemis&media=COPY

 

[Adr2600]

This guy makes good stuff. I have the red badges (not installed yet). Had them on my 2016 also

https://www.ebay.com/itm/1841122956...BGkDMlHSGq&var=&widget_ver=artemis&media=COPY

Link isn’t working for me for some reason ):

 

[MAGS1]

 

[MAGS1]

You’re right up the road from me, right? If you like the red, I’ll give you my grille badge. I bought both the grille and trunk badge but decided I want to keep the grille clean. I will be using the trunk badge at some point but you’re welcome to the grille badge if you want it

 

[Adr2600]

You’re right up the road from me, right? If you like the red, I’ll give you my grille badge. I bought both the grille and trunk badge but decided I want to keep the grille clean. I will be using the trunk badge at some point but you’re welcome to the grille badge if you want it

I appreciate that, but I went with chrome so it matches my stock badges!

 

[Adr2600]

Setup I went with

 

[MAGS1]

Setup I went with

Nice. Bullitt grille is such a good look. I did just the lower grille and it made such a difference on the overall look of the front end.

 

[Adr2600]

Nice. Bullitt grille is such a good look. I did just the lower grille and it made such a difference on the overall look of the front end.

I’m really excited, figured since I touched the rear end the front deserved some love.

 

[MAGS1]

I’m really excited, figured since I touched the rear end the front deserved some love.

Just a heads up the clips to release the grilles are a pain. Once you get a few released it gets easier though. Getting the new grilles clipped back in requires some force too. At least mine did, the clips were pretty stiff. Totally worth the effort IMO though.

 

[Kabayo]

You’re right up the road from me, right? If you like the red, I’ll give you my grille badge. I bought both the grille and trunk badge but decided I want to keep the grille clean. I will be using the trunk badge at some point but you’re welcome to the grille badge if you want it

Mags, Yours is M1 right? Are you sure you want to remove the rear Mach emblem which is bitchen?

 

[MAGS1]

Mags, Yours is M1 right? Are you sure you want to remove the rear Mach emblem which is bitchen?

Nope, I’m a GT. If it was an M1, I agree, I wouldn’t touch the rear emblem.

 

[Adr2600]

Just a heads up the clips to release the grilles are a pain. Once you get a few released it gets easier though. Getting the new grilles clipped back in requires some force too. At least mine did, the clips were pretty stiff. Totally worth the effort IMO though.

Honestly probably going to have that resto shop I had do the studs do it, don’t wanna risk messing it up lol

 

[MAGS1]

Honestly probably going to have that resto shop I had do the studs do it, don’t wanna risk messing it up lol

It’s totally doable on your own, just requires some patience. My son helped me with mine and it took maybe 2 hours or so. And that’s with me stopping for a few minutes because I sliced my finger open when my hand slipped trying to pry one of the clips loose. But that was mostly stupidity on my part.

But it’s mainly just taking your time and having some patience (which I have very little of btw). I did clean the crash bar when I had the front bumper off because yeah I’m that anal LOL. If you decide to tackle it yourself, leave the belly pan attached to the bumper. No need to take it off. CJ Pony parts has a great install video that is spot on.

 

[Adr2600]

It’s totally doable on your own, just requires some patience. My son helped me with mine and it took maybe 2 hours or so. And that’s with me stopping for a few minutes because I sliced my finger open when my hand slipped trying to pry one of the clips loose. But that was mostly stupidity on my part.

But it’s mainly just taking your time and having some patience (which I have very little of btw). I did clean the crash bar when I had the front bumper off because yeah I’m that anal LOL. If you decide to tackle it yourself, leave the belly pan attached to the bumper. No need to take it off. CJ Pony parts has a great install video that is spot on.

I may have attempted this with the bullitt grille, but I actually decided to go a different direction… did a bit more research and cervini C series grew on me so going with their upper and lower

Sponsored