Link isn’t working for me for some reason ):This guy makes good stuff. I have the red badges (not installed yet). Had them on my 2016 also
https://www.ebay.com/itm/1841122956...BGkDMlHSGq&var=&widget_ver=artemis&media=COPY
I appreciate that, but I went with chrome so it matches my stock badges!You’re right up the road from me, right? If you like the red, I’ll give you my grille badge. I bought both the grille and trunk badge but decided I want to keep the grille clean. I will be using the trunk badge at some point but you’re welcome to the grille badge if you want it
Nice. Bullitt grille is such a good look. I did just the lower grille and it made such a difference on the overall look of the front end.Setup I went with
![]()
Just a heads up the clips to release the grilles are a pain. Once you get a few released it gets easier though. Getting the new grilles clipped back in requires some force too. At least mine did, the clips were pretty stiff. Totally worth the effort IMO though.I’m really excited, figured since I touched the rear end the front deserved some love.
Mags, Yours is M1 right? Are you sure you want to remove the rear Mach emblem which is bitchen?You’re right up the road from me, right? If you like the red, I’ll give you my grille badge. I bought both the grille and trunk badge but decided I want to keep the grille clean. I will be using the trunk badge at some point but you’re welcome to the grille badge if you want it
Nope, I’m a GT. If it was an M1, I agree, I wouldn’t touch the rear emblem.Mags, Yours is M1 right? Are you sure you want to remove the rear Mach emblem which is bitchen?
Honestly probably going to have that resto shop I had do the studs do it, don’t wanna risk messing it up lolJust a heads up the clips to release the grilles are a pain. Once you get a few released it gets easier though. Getting the new grilles clipped back in requires some force too. At least mine did, the clips were pretty stiff. Totally worth the effort IMO though.
It’s totally doable on your own, just requires some patience. My son helped me with mine and it took maybe 2 hours or so. And that’s with me stopping for a few minutes because I sliced my finger open when my hand slipped trying to pry one of the clips loose. But that was mostly stupidity on my part.Honestly probably going to have that resto shop I had do the studs do it, don’t wanna risk messing it up lol
I may have attempted this with the bullitt grille, but I actually decided to go a different direction… did a bit more research and cervini C series grew on me so going with their upper and lowerIt’s totally doable on your own, just requires some patience. My son helped me with mine and it took maybe 2 hours or so. And that’s with me stopping for a few minutes because I sliced my finger open when my hand slipped trying to pry one of the clips loose. But that was mostly stupidity on my part.
But it’s mainly just taking your time and having some patience (which I have very little of btw). I did clean the crash bar when I had the front bumper off because yeah I’m that anal LOL. If you decide to tackle it yourself, leave the belly pan attached to the bumper. No need to take it off. CJ Pony parts has a great install video that is spot on.
![]()