Gauge Mode Boost Display on GT?

[BMR Tech]

This is not a "premium" feature.

From what I have gathered, it is all 2015 non-PP cars.

My base as base gets 2015 GT has this. It is within 1psi of my reading on a mechanical gauge and my high accuracy Zeitronix MAP sensor.

Sponsored

 

[BMR Tech]

Only 2015 premium non PP have this feature. Not 2016 up. Sorry guys glad I bought a 2015 model. Ford took it away after that. Funny part his car don't go into boost until 6500k lol. Not right at all. So we know it's not accurate at all zing

This is not an accurate statement. Both the premium comment and the not being right/accurate due to the delay.

It is actually very indicative of how a centrifugal supercharger works when under vacuum then load is applied from a rolling start like he performs.

It may have a slight delay on the initial hit, but it's pretty close to reality.

 

[JennyStang]

This is not an accurate statement. Both the premium comment and the not being right/accurate due to the delay.

It is actually very indicative of how a centrifugal supercharger works when under vacuum then load is applied from a rolling start like he performs.

It may have a slight delay on the initial hit, but it's pretty close to reality.

That must suck to have a centri then. I would be pissed to wot it at 4K and not get boost until 6500. Tvs or twin screw FTW zing

 

[SolarFlare]

That must suck to have a centri then. I would be pissed to wot it at 4K and not get boost until 6500. Tvs or twin screw FTW zing

There is boost from the hit. As long as you don't try to go WOT in 5th at 40mph.

 

[TooSoonJunior]

Accuracy of the gauge is 100% reliant on the accuracy of the tune in the car. Its all calculated mathematically based on inputs from the tune/tuner and various sensors. If its all jacked up it will not be accurate at all.

 

[JennyStang]

Accuracy of the gauge is 100% reliant on the accuracy of the tune in the car. Its all calculated mathematically based on inputs from the tune/tuner and various sensors. If its all jacked up it will not be accurate at all.

So the he has a bad tune to go from 4K wot and not get boast till 6500k on that gauge. No way a centri takes that long to build any boost. I can see slow boost build but 0 psi to 10 psi at 6500 ain't right

 

[Boosted5.0_NY]

I just purchased the EcoBoost gauge cluster which includes Vac/Boost. It may not be the most accurate but it has a factory look. I believe this is for PP cars only....

http://www.cjponyparts.com/ford-per...MI1NjG88SR1gIVBo5pCh0VwAV3EAQYASABEgKFb_D_BwE

.

 

[Hardmoney07]

Has this ever been figured out I’d like to have this option on my 2016 GT PP if it can read the vacuum it can definitely read this

 

[Vegas5OH]

You use forscan to enable it, I have it enabled in my 16 GT along with a bunch of other things I changed.

 

[96gt4.6]

I have had it enabled since I put the Whipple kit on, works fine. Mine shows 9psi on a stage 1 Whipple with cats/ect. I have yet to hook up the mechanical gauge to verify the accuracy, but I bet it's close.

 

[Hardmoney07]

I have had it enabled since I put the Whipple kit on, works fine. Mine shows 9psi on a stage 1 Whipple with cats/ect. I have yet to hook up the mechanical gauge to verify the accuracy, but I bet it's close.

Thanks so much man

 

[Hardmoney07]

One more dumb question do you have a link or place I can go to see how this is done

 

[Kevin]

 

[Hardmoney07]

Thank you so much

 

[Bbarfoot14]

So does this work for 15 pp? It only mentions 16-17 in the YouTube

Sponsored