Sponsored

Finally getting my Whipple Installed!

BDMACH1

Well-Known Member
Joined
Oct 16, 2015
Threads
16
Messages
880
Reaction score
347
Location
Ravenna, Ohio
First Name
Bob
Vehicle(s)
2016 Mustang GT/CS
Gave up trying to make time to get the Supercharger installed. Decided to trailer the car down to Terry@Beefcake Racing to handle the install. Terry and the guys will be installing oil pump gears, crank sprocket along with BOSS 302 tensioners in the motor. Then they will get the Whipple & Fore Innovations Stage 4 fuel system with FC3 controller and ID 1000 injectors. Can't wait to see what kind of power Terry and his crew, along with Lund doing the tuning squeeze out of it!
Sponsored

 

EgoBoost

9/11 Never Forget
Joined
Jul 23, 2014
Threads
28
Messages
700
Reaction score
836
Location
FL
Vehicle(s)
2024 Black PP GT 6 SPEED
Great build! It's in good hands as well. Congrats!
 

jhatley7

Well-Known Member
Joined
Dec 18, 2015
Threads
15
Messages
1,150
Reaction score
390
Location
Texas
Vehicle(s)
2016 White GT PP, 2022 F350
Gave up trying to make time to get the Supercharger installed. Decided to trailer the car down to Terry@Beefcake Racing to handle the install. Terry and the guys will be installing oil pump gears, crank sprocket along with BOSS 302 tensioners in the motor. Then they will get the Whipple & Fore Innovations Stage 4 fuel system with FC3 controller and ID 1000 injectors. Can't wait to see what kind of power Terry and his crew, along with Lund doing the tuning squeeze out of it!
You won't regret it! Congrats. What upper pulley are you going with?
 

SoCalTim

Member
Joined
Sep 14, 2015
Threads
185
Messages
3,137
Reaction score
1,610
Location
CA
First Name
Tim
Vehicle(s)
Sold : 15 GT
Awesome, your car is in good hands for sure. Gonna be a beast when she's done!
 

WhiteyDog

WOOF!!!
Joined
Jun 30, 2016
Threads
15
Messages
1,789
Reaction score
731
Location
Manheim, Pa.
Vehicle(s)
'16 GT PP
Awesome, man. Hang on!!! WOOOO!!!!!
 

Sponsored

OP
OP
BDMACH1

BDMACH1

Well-Known Member
Joined
Oct 16, 2015
Threads
16
Messages
880
Reaction score
347
Location
Ravenna, Ohio
First Name
Bob
Vehicle(s)
2016 Mustang GT/CS
Great build! It's in good hands as well. Congrats!
Thanks Ego!:)

You won't regret it! Congrats. What upper pulley are you going with?
Jh...I have the 10 rib setup with the ATI 20% damper. Gonna run the 3.50 upper and see what she makes! I have a CobraJet intake and a C&R Racing Coolant reservoir on its way for extra clearance. Trying to get my hands on the new Whipple heat exchanger, Hoping the guys at Whipple come thru for me!

Awesome, your car is in good hands for sure. Gonna be a beast when she's done!
Thanks SoCal...I can't wait!:headbang:
 
Last edited:

TooSoonJunior

Well-Known Member
Joined
Feb 10, 2017
Threads
79
Messages
823
Reaction score
175
Location
Southern CT
Vehicle(s)
2015 Mustang GT PP M6
Nice! Whats the clearance issues you mention? Have my kit sitting on the shelf, same kind of situation as you I may just schedule it for install at some point.
 

beefcake

Well-Known Member
Diamond Sponsor
Joined
Oct 18, 2014
Threads
1,416
Messages
12,181
Reaction score
4,661
Location
Bethel
Vehicle(s)
2018 Ford Mustang
we'll be ready for ya!
 
OP
OP
BDMACH1

BDMACH1

Well-Known Member
Joined
Oct 16, 2015
Threads
16
Messages
880
Reaction score
347
Location
Ravenna, Ohio
First Name
Bob
Vehicle(s)
2016 Mustang GT/CS
Awesome, man. Hang on!!! WOOOO!!!!!
Thanks White!:)

Nice! Whats the clearance issues you mention? Have my kit sitting on the shelf, same kind of situation as you I may just schedule it for install at some point.
Thanks TSJ!:)

The clearance issue I am referring to is, between the Supercharger pulley and the coolant reservoir tank. When you run a 10 rib system, it gets REALLY tight to the stock coolant tank. I couldn't take it anymore, I have had my Whipple kit since the Black Friday deal that Lethal Performance had all the back in 2015!!! I've had this blower sitting here before I even owned the damn car! lol:headbonk:
 
OP
OP
BDMACH1

BDMACH1

Well-Known Member
Joined
Oct 16, 2015
Threads
16
Messages
880
Reaction score
347
Location
Ravenna, Ohio
First Name
Bob
Vehicle(s)
2016 Mustang GT/CS
we'll be ready for ya!
I'm starting to lose sleep now I'm so excited! lol



Since you guys are going to be in the motor, do you happen to have the MMR Secondary Tensioner Bracket in stock???
 

Sponsored

tsloms

Well-Known Member
Joined
Jan 3, 2016
Threads
8
Messages
406
Reaction score
110
Location
Wisconsin
Vehicle(s)
2016 Mustang GT Magnetic PP
Is this going to be on a stock short block? With the boost you'll be running I doubt the engine will last long without a build.
 
OP
OP
BDMACH1

BDMACH1

Well-Known Member
Joined
Oct 16, 2015
Threads
16
Messages
880
Reaction score
347
Location
Ravenna, Ohio
First Name
Bob
Vehicle(s)
2016 Mustang GT/CS
Is this going to be on a stock short block? With the boost you'll be running I doubt the engine will last long without a build.
Yes, stock engine. I think it should make around 15-16lbs. It will be tuned on E85 Fuel. Plans to build a new sleeved short-block this winter.
 

tsloms

Well-Known Member
Joined
Jan 3, 2016
Threads
8
Messages
406
Reaction score
110
Location
Wisconsin
Vehicle(s)
2016 Mustang GT Magnetic PP
Yes, stock engine. I think it should make around 15-16lbs. It will be tuned on E85 Fuel. Plans to build a new sleeved short-block this winter.
I have a basically stock engine as well plus timing and oil pump gears and the MMR secondary tensioner.
I'm running a 6 rib on mine with 3.25 pulley on e85 and seeing about 14-15psi at redline at 7500rpm. I'm thinking with the 20% OD lower you'll see closer to 18-19psi with the 3.5" upper. With a 3.75 upper you'll be at a solid 15psi for sure.
 
OP
OP
BDMACH1

BDMACH1

Well-Known Member
Joined
Oct 16, 2015
Threads
16
Messages
880
Reaction score
347
Location
Ravenna, Ohio
First Name
Bob
Vehicle(s)
2016 Mustang GT/CS
I have a basically stock engine as well plus timing and oil pump gears and the MMR secondary tensioner.
I'm running a 6 rib on mine with 3.25 pulley on e85 and seeing about 14-15psi at redline at 7500rpm. I'm thinking with the 20% OD lower you'll see closer to 18-19psi with the 3.5" upper. With a 3.75 upper you'll be at a solid 15psi for sure.
I've talked to a few people who have run this combination, and they said around 16lbs. I do have a 3.75 upper here as well. Maybe some of the guys who have run the combination I am trying trying to will chime in..
 

jhatley7

Well-Known Member
Joined
Dec 18, 2015
Threads
15
Messages
1,150
Reaction score
390
Location
Texas
Vehicle(s)
2016 White GT PP, 2022 F350
I have a basically stock engine as well plus timing and oil pump gears and the MMR secondary tensioner.
I'm running a 6 rib on mine with 3.25 pulley on e85 and seeing about 14-15psi at redline at 7500rpm. I'm thinking with the 20% OD lower you'll see closer to 18-19psi with the 3.5" upper. With a 3.75 upper you'll be at a solid 15psi for sure.
This. ^^^^^^^

I lost my motor with the 3.0 and standard lower 17-18psi pushing to 8k. If you want the motor to last till winter, I would stay in 15psi range. Granted there are several other variables but 15 seems to be the healthy max. I also planned on waiting until winter to do my build but......... that didn't happen. :doh:
Sponsored

 
 




Top