Community Feedback Needed! Apex Wheels Project ML-10 Survey

[Apex Wheels]

Some of you may have already seen the reveal of this project on our instagram, but we wanted to reach out to the Mustang community on the forums as well to collect feedback about the development of a new wheel design.​

Project ML-10 Background:

After Josh, one of our Senior Product Engineers installed a widebody kit on his race car project, he had to design a custom set of wheels to fit his extreme application. Originally a one off project, when he showed the team what he created, we were floored. And our community was too when we shared a picture on Instagram and Facebook.


We’ve made it an official project, but to make this wheel a reality, we need you to decide on some of the details by taking our survey.​

Need more information? Subscribe to our newsletter and check out project updates along with additional photos on our website.
​

Sponsored

 

[SheepDog]

I mean, it looks like any other mesh pattern that has been around for 30 years.

https://www.fitmentindustries.com/b...MfFtFmG1B88iZ0gIck2oWHkS-5He9TmEaAmIiEALw_wcB

https://www.tirerack.com/wheels/Whe...id=AL!3756!3!!!!x!!&gclsrc=aw.ds&gad_source=1

 

[Apex Wheels]

I mean, it looks like any other mesh pattern that has been around for 30 years.

https://www.fitmentindustries.com/b...MfFtFmG1B88iZ0gIck2oWHkS-5He9TmEaAmIiEALw_wcB

https://www.tirerack.com/wheels/Whe...id=AL!3756!3!!!!x!!&gclsrc=aw.ds&gad_source=1

Thank you for the feedback. There is a LOT different in the details with the ML-10 in its current form, but I do honestly appreciate your perspective on it.

 

[SheepDog]

Thank you for the feedback. There is a LOT different in the details with the ML-10 in its current form, but I do honestly appreciate your perspective on it.

Don't get me wrong, your ML-10 wheel looks nice but to me at least, it doesn't differentiate itself from so many other very similar designs. Your pricing and direct fitment for Forged offerings is totally on point though.

 

[webspoke]

I like the 3pc appearance, and it will look great in the larger sizes. Please consider offering a wider 20x12 for the gt500s rear and square fitment while you are at it.

 

[mcky2011]

Looks hard to clean.
I'm in the minority as I prefer the grip of OE pads vs their dust output.

 

[daSNAK3]

Would look great on the SN95 (94-04) Mustangs for sure.

Sponsored