CATCH CAN & Hellion Twins

[Aussie-up-north]

Gday all.

So I have a ‘15 GT built motor with a hellion twin setup.

There is two Moroso vented single line catch cans that like to vapor a little but they leave a oily mess.

What other options do I have??

Sponsored

 

[Manny231988]

I like all the Fathouse Fab stuff but I’m just running breather filters lol

 

[Manny231988]

Did you ever have stalling issues with your Hellion kit I do small revs sometimes and the Rpms fall and car tries to stall or sometimes it dies

 

[kcc0521]

How is ur current setup routed? Is it just each valve cover to vented can? Did u remove pcv valve

 

[Hyper771987]

I have also looked into how to vent it, the best solution that I have come up with is using the Fat house catch can and running 10an lines to the valve covers. I am replacing the PCV with UPR Valve cover fittings ( cheapest I have found) $24.99.

 

[kcc0521]

I don't see the difference between the fathouse fab catch can and all the other vented cans other than it cost like 3 times as much. I would love to see the inside of the can to verify this.

 

[Hyper771987]

I don't see the difference between the fathouse fab catch can and all the other vented cans other than it cost like 3 times as much. I would love to see the inside of the can to verify this.

I agree with you, at the end it’s really personal choice. I only got it because I got a good deal on a used one.

 

[kcc0521]

I agree with you, at the end it’s really personal choice. I only got it because I got a good deal on a used one.

How long have you been running it? Do you have any issues with oil smell inside the car of issues with oil residue under the hood.

 

[DavidHuff]

Gday all.

So I have a ‘15 GT built motor with a hellion twin setup.

There is two Moroso vented single line catch cans that like to vapor a little but they leave a oily mess.

What other options do I have??

There is a Fathouse oil catch can for a turbo setup in the classified section at a great price.

 

[Hyper771987]

How long have you been running it? Do you have any issues with oil smell inside the car of issues with oil residue under the hood.

I can’t give you any experience reviews.
I haven’t had a chance to see or even install the can.

 

[Aussie-up-north]

Did you ever have stalling issues with your Hellion kit I do small revs sometimes and the Rpms fall and car tries to stall or sometimes it dies

Never, might be in the tune?

 

[Aussie-up-north]

How is ur current setup routed? Is it just each valve cover to vented can? Did u remove pcv valve

Correct and, I’m not to sure about the valve, I would have to have a look

 

[Aussie-up-north]

I have also looked into how to vent it, the best solution that I have come up with is using the Fat house catch can and running 10an lines to the valve covers. I am replacing the PCV with UPR Valve cover fittings ( cheapest I have found) $24.99.

Do you have a link to the can and the fittings for the valve?

 

[Aussie-up-north]

How long have you been running it? Do you have any issues with oil smell inside the car of issues with oil residue under the hood.

Yeah, fucking stinks

 

[kcc0521]

Going to mount vented eBay can in driver side fender well. I boilught upr fittings and eBay line. About 130 in setup.

Sponsored