Bigwormhraphix install

[daytripper]

Avery Supreme wrap is installed dry. Its a good product and is the only one with a warranty on horizontal surfaces.

Sponsored

 

[shockme66]

FYI - MoProAuto seems to have all designs in various material options. Same if not better pricing than BWG.

Avery Supreme does seem like the best.

I'll have to see what I get from BWG tomorrow...

 

[Fatty]

Will do. good luck with the install!!

Her are the instructions for BWG.

 

[bbrilli]

Stay away from Mopro!

FYI - MoProAuto seems to have all designs in various material options. Same if not better pricing than BWG.

Avery Supreme does seem like the best.

I'll have to see what I get from BWG tomorrow...

I had a really disappointing experience with Mopro. The kit does NOT fit well. The stripes are too short and you have to cut an extra piece to fit the front end. They also are not selling 3M 1080. Their "gloss" black is more of a satin finish than gloss.

I am going to post pics of their product on my car compared to the proper job my installer is going to do tomorrow.

Here are the pics with the Mopro graphics...

Missing the piece in front of the hood. My installer used the extra piece with back up detector cutouts to make the piece on the car.

The stripes are too short in several places.

Their response was to send me a copy of their disclaimer and say you installed them...tough luck.

I did make a mistake assuming the pictures on their website was a true representation of their product.

 

[Fatty]

Page 1

 

[Fatty]

2

 

[Fatty]

3

 

[Fatty]

4...could only post one at a time for some reason.

 

[shockme66]

Thanks for posting. I just waxed my car last weekend; I'm really going to have to careful and make sure I remove it all.

I may wash the hood, roof, and trunk with dawn and they use the IPA as a final measure.

 

[GT Nate]

Thanks for posting. I just waxed my car last weekend; I'm really going to have to careful and make sure I remove it all.

I may wash the hood, roof, and trunk with dawn and they use the IPA as a final measure.

Claying the car will remove the wax, not dawn.

 

[shockme66]

Claying the car will remove the wax, not dawn.

Ok, but when claying you need to use a lubricant which is usually a detailer or a spray type of wax. Will the IPA alone remove the wax?

 

[Fatty]

Ok, but when claying you need to use a lubricant which is usually a detailer or a spray type of wax. Will the IPA alone remove the wax?

You could clay bar with dawn and water, but IPA would also work, if you have denatured alcohol, use that.

 

[Fatty]

I had a really disappointing experience with Mopro. The kit does NOT fit well. The stripes are too short and you have to cut an extra piece to fit the front end. They also are not selling 3M 1080. Their "gloss" black is more of a satin finish than gloss.

I am going to post pics of their product on my car compared to the proper job my installer is going to do tomorrow.

Here are the pics with the Mopro graphics...

Missing the piece in front of the hood. My installer used the extra piece with back up detector cutouts to make the piece on the car.

The stripes are too short in several places.

Their response was to send me a copy of their disclaimer and say you installed them...tough luck.

I did make a mistake assuming the pictures on their website was a true representation of their product.

WOW! Thats way off! And most all too. Will never use them.

 

[Fatty]

I had a really disappointing experience with Mopro. The kit does NOT fit well. The stripes are too short and you have to cut an extra piece to fit the front end. They also are not selling 3M 1080. Their "gloss" black is more of a satin finish than gloss.

I am going to post pics of their product on my car compared to the proper job my installer is going to do tomorrow.

Here are the pics with the Mopro graphics...

Missing the piece in front of the hood. My installer used the extra piece with back up detector cutouts to make the piece on the car.

The stripes are too short in several places.

Their response was to send me a copy of their disclaimer and say you installed them...tough luck.

I did make a mistake assuming the pictures on their website was a true representation of their product.

WOW! Thats way off! And all panels too. Will never use them.

 

[shockme66]

I have hear such good things about Big work; that's why i paid the extra bucks and went with them. I'll find out this weekend how good they are.

Thanks for posting about MoPro; at least other members will be informed.

Sponsored