Arcane fuel system users.

[HKusp]

I have an Arcane system I am attempting to install. Their directions, particularly the wiring portion, leave more than a little to be desired. I read somewhere in the last week or so, someone responded in another thread that the wiring was the easiest part of the installation. I looked but can't remember what thread that was in, or who said it. I could absolutely use some pointers. I have the pumps wired and the bucket installed. I don't know how to wire up the harness that was included and as I said, their directions have no step by step instructions that I can find.

Sponsored

 

[HAVOC_5.0]

I have an Arcane system I am attempting to install. Their directions, particularly the wiring portion, leave more than a little to be desired. I read somewhere in the last week or so, someone responded in another thread that the wiring was the easiest part of the installation. I looked but can't remember what thread that was in, or who said it. I could absolutely use some pointers. I have the pumps wired and the bucket installed. I don't know how to wire up the harness that was included and as I said, their directions have no step by step instructions that I can find.

If you don't get any help, I don't have my son this weekend. I'll make sure to get down on Saturday after work to get this thing wired and done.

 

[HKusp]

I have bigger problems, but I need to get this handled too.

 

[Cory S]

@Juggernaut Power

See if this works.

 

[HKusp]

I emailed them earlier today.

 

[HKusp]

I found this PDF on their site that is a basic "wiring diagram". I can work with this. I am linking it here for anyone else who ends up in my situation.

https://img1.wsimg.com/blobby/go/eccc8a8f-3286-4d66-9e57-ece5f6aae247/Electrical.pdf

 

[Proshop]

@LOL WUT

 

[LOL WUT]

Can you post a picture of what you’re stuck on?

The long wire with the fuses runs up to the front of the car into the passenger wheel well and into the engine bay. In the upper passenger side of the wheel well there is a rubber grommet that you can cut open slightly to fish the wires into the passenger fender area and then up to the engine bay. Within the engine bay the 2 power wires attached to the end of the long wire you just ran through the car can be attached to the under hood fuse box post.

If the above is completed, and your pumps are wired, the only thing left to do is connect the plug and play connection from the new harness to the existing harness plug that you disconnected from the OEM pump.

Post up a few photos of what you’re stumped on and I’d be happy to assist!

 

[DougS550]

I have an Arcane system I am attempting to install. Their directions, particularly the wiring portion, leave more than a little to be desired. I read somewhere in the last week or so, someone responded in another thread that the wiring was the easiest part of the installation. I looked but can't remember what thread that was in, or who said it. I could absolutely use some pointers. I have the pumps wired and the bucket installed. I don't know how to wire up the harness that was included and as I said, their directions have no step by step instructions that I can find.

That is the system I was planning on buying Arcane stage 3 this fall. But; I do not care about how easy it is to wire in a particular system. When people are paying big money for a plug and play upgrade, it should come with every single piece of instructions for the Install, period. I'm tired of company's selling high end parts, upgrades but don't put forth the effort to ensure they include complete, detailed installation instructions. But that's just me.

 

[HKusp]

That is the system I was planning on buying Arcane stage 3 this fall. But; I do not care about how easy it is to wire in a particular system. When people are paying big money for a plug and play upgrade, it should come with every single piece of instructions for the Install, period. I'm tired of company's selling high end parts, upgrades but don't put forth the effort to ensure they include complete, detailed installation instructions. But that's just me.

They assume we aren't idiots, and I think that's a big assumption, at least in reference to me, lol.

 

[HKusp]

Can you post a picture of what you’re stuck on?

The long wire with the fuses runs up to the front of the car into the passenger wheel well and into the engine bay. In the upper passenger side of the wheel well there is a rubber grommet that you can cut open slightly to fish the wires into the passenger fender area and then up to the engine bay. Within the engine bay the 2 power wires attached to the end of the long wire you just ran through the car can be attached to the under hood fuse box post.

If the above is completed, and your pumps are wired, the only thing left to do is connect the plug and play connection from the new harness to the existing harness plug that you disconnected from the OEM pump.

Post up a few photos of what you’re stumped on and I’d be happy to assist!

It's not really a part of what I am stuck on. I am stuck on ALL the wiring once you have the pumps wired up, and the hat installed in the tank. The harness isn't labeled and there are no REAL wiring instructions. I looked at the "instructions" I linked above and SHOULD be able to make that work. I hadn't seen that before as their site is not organized like I would do it. They post a PDF for Stage 1, and then stage 2, then stage 3, THEN at the very bottom is the "wiring diagram" one. So because it was at the bottom and not printed and actually included in the kit like the routing for the plumbing of the stage 2 hoses and regulator, I didn't see it until today.

 

[DougS550]

They assume we aren't idiots, and I think that's a big assumption, at least in reference to me, lol.
It has nothing to do if your an Electrical Engineer or an I dividual with minimal knowledge on the part/system you purchase to install. It's called lazy.

 

[DougS550]

They assume we aren't idiots, and I think that's a big assumption, at least in reference to me, lol.

Wait a Minute. Did you buy the Arcane from Juggernaut? They say they give a Link for the complete install instructions for each Stage of Fuel System Kit they sell?

Juggernaut Video


Other System Install video

 

[HKusp]

Wait a Minute. Did you buy the Arcane from Juggernaut? They say they give a Link for the complete install instructions for each Stage of Fuel System Kit they sell?

Juggernaut Video


Other System Install video

Yep, I got the stage 2 kit. I watched that video today and saw that he said that, which is why I went back and scrolled past all the information on the plumbing for the kits and actually saw the "wiring" PDF.

 

[DougS550]

Yep, I got the stage 2 kit. I watched that video today and saw that he said that, which is why I went back and scrolled past all the information on the plumbing for the kits and actually saw the "wiring" PDF.

Great. I will get the Stage 3 and pay for them for a complete fuel hat/pump assembly.

Sponsored