Any issue on 2015 with opt7 arrow?

[GT83]

Does the issue on the 2015 is corrected on the opt7 arrow sequential led??
Planning on buying the system

Sponsored

 

[natepcbfl]

They look great, I am having an issue with the driver side though sequencing. I have seen reports of some others having this issue as well. OPT7 replaces them from what I have seen but the last report I saw of this was back in 2018. @opt7lighting

 

[GT83]

They look great, I am having an issue with the driver side though sequencing. I have seen reports of some others having this issue as well. OPT7 replaces them from what I have seen but the last report I saw of this was back in 2018. @opt7lighting

Not from me, i bought it on black friday last year and still working

Owner 2015 GT

 

[fordxgt]

The look great when they work but the turn signals on mine would intermittently hyperblink if the running lights were off

 

[natepcbfl]

The look great when they work but the turn signals on mine would intermittently hyperblink if the running lights were off

Yep, I checked it yesterday when I got home and after I turned on the lights it was fine. Even after turning the lights off it was OK. Seems to be only when the car is started and the lights dont come on at all, then when the lights come on "something happens" that makes it work with no issue weather the lights are on or off.

 

[Murdered0ut150]

Yes, I posted about 15 mins ago the issues I’m experiencing just trying to figure out how to attach videos to show but check out my thread above. They’re making good on it ( I think)

 

[Fogg]

There are some other threads on these signals as well. I am trying to figure out how to get mine working as I expect them to do... @Grimmer has lots of experience here

In general it seems there are two issues:
a) The turn signal flashing strange on the outside. It is like doing one full cycle and one half. This is a known issue especially on the 15 models of Mustang. Contact OPT-7 and ask for the additional resistors. This will fix it.

b) the white light (DRL style) does not work as expected. I.e. on mine I did not get it to work at all yet - still trying with some forscan magic.
Best solution here seems to be to either by the DiodeDynamics cable set (about 40$) or build our own cable set to 'steal' power from the head lamps. Grimmer posted a good guide on this in this thread: https://www.mustang6g.com/forums/posts/2515312/

 

[natepcbfl]

There are some other threads on these signals as well. I am trying to figure out how to get mine working as I expect them to do... @Grimmer has lots of experience here

In general it seems there are two issues:
a) The turn signal flashing strange on the outside. It is like doing one full cycle and one half. This is a known issue especially on the 15 models of Mustang. Contact OPT-7 and ask for the additional resistors. This will fix it.

b) the white light (DRL style) does not work as expected. I.e. on mine I did not get it to work at all yet - still trying with some forscan magic.
Best solution here seems to be to either by the DiodeDynamics cable set (about 40$) or build our own cable set to 'steal' power from the head lamps. Grimmer posted a good guide on this in this thread: https://www.mustang6g.com/forums/posts/2515312/

I have a 2015 and saw reports on this. I questioned @opt7lighting before purchasing and was told the resistors are built in now. Well mine is doing the weird sequencing and I am still trying to get @opt7lighting to respond to me.

 

[Fogg]

I tend to go on their website and use the live chat. This works pretty reliable so for.

 

[natepcbfl]

Got a reply for requested information. Gave them the info yesterday and I have an email this morning of them sending out resistors.

 

[db252]

Had them on my 2016 for the last 4 months without any issue.

Sponsored