Aggressive Fitment Thread

[rl2k05]

20x10 +40 df5s with 295/30/20 on all 4 corners with 5mm spacers up front. Hopefully get steeda progressive springs.

Hi, saw this thread, two questions:
1. Do you have any rubbing issues in the front
2. where did you get your 5mm spacers from?

Sponsored

 

[NightParade]

New wheels and tires on 19x10.5 +40 in the rear and effectively +25 in the front with 305 30 squared setup.

 

[RubyRed15]

New wheels and tires on 19x10.5 +40 in the rear and effectively +25 in the front with 305 30 squared setup.

Brand/model?

 

[NightParade]

Brand/model?

They are Weds sport wheels model SA15-R. They weigh around 21.5 lbs each.

 

[tawheed]

They are Weds sport wheels model SA15-R. They weigh around 21.5 lbs each.

You selling your T7Rs?

 

[redclaw05]

I’m on a 3 month wait for my emotion cr kiwami.

 

[2morrow]

They are Weds sport wheels model SA15-R. They weigh around 21.5 lbs each.

Damn! :eyebulge: Impressive!

 

[Schu]

Project 6GR's 19x11 and 19x11.5 305/30 and 325/30 MPS4S. Disregard the bronze 5.0 emblems. I am going today to get some paint matched to the wheels

Is that the gt350r fitment?

 

[Trakhor]

Is that the gt350r fitment?

yes it is

 

[KatoS550]

P6GR FIVE
20x10/11 +35/+50

Nitto NT555 G2
275/35
315/35

 

[Schu]

yes it is

Is there any rubbing in the front?

 

[Trakhor]

Is there any rubbing in the front?

Zero rubbing but i run -2.4 camber. I have about 3/8" poke

 

[MrWolf]

Thanks,
Camber in the front is -2.4. A few pages back (maybe more than a few) I had P51s in the same size. These are dimensionally the same. So the same 1/4-3/8 poke up front.

The rear is +55 or +56 what ever the standard is, not that 1mm makes a whole lot of difference.

What camber are you running in the rears and do you have any poke there?

I’m not looking at going as aggressive in the front. It’s the rears I’m interested in (I’m actually hoping to go with 345s in the rear)

 

[Trakhor]

What camber are you running in the rears and do you have any poke there?

I’m not looking at going as aggressive in the front. It’s the rears I’m interested in (I’m actually hoping to go with 345s in the rear)

345s are easy. Paul at PK Auto Design has done it quite a bit. I have -1.9 camber in the rear. Zero poke in fact its tucked in a little. My long term plan is to swap on GT350 brakes so eventually the rear will more closely match the front.

 

[Myshelby3425]

what wing is this?

Sponsored