Aggressive Fitment Thread

[RubyRed15]

There's a BOGO coupon floating around here somewhere.

Sponsored

 

[Supa LA]

Hell to the freaking ya if you want me 2

Haha sounds great! Feel free to pm the details to me. ;)

 

[BigEasyGT]

There's a BOGO coupon floating around here somewhere.

Guess I'm getting coils and longtubes too lol

 

[juan_tony1]

Rovos Durban 20x10 et.+38 all around with a 3mm spacer up front to clear Performance Pack brakes.

255/35 tire all around
BC Racing coil overs lowered about 3.5 inches all around.

How do u like the bc coilover?

 

[zacpounds]

[MENTION=19026]zacpounds[/MENTION] looking at your car makes me want to wait for coils instead of the sportlines. This fender gap is KILLING me lol.

Lol. Coilovers could be bad for the health of your longtubes and ground clearance. Having an Ecoboost and being overly parnoid about making my car sound like rice helps me out and avoiding modding the exhaust.

How do u like the bc coilover?

I love them. Having the ability to adjust them as I need to is awesome! even at this ride height I'm only 8 away from full hard in the front and 10 in the rear, so it's not as bad as I thought it would be.

 

[Need4SpeedMotors]

Guess I'm getting coils and longtubes too lol

Lol

Haha sounds great! Feel free to pm the details to me. ;)

Will do

 

[ATTFighter]

Rovos Durban 20x10 et.+38 all around with a 3mm spacer up front to clear Performance Pack brakes.

255/35 tire all around
BC Racing coil overs lowered about 3.5 inches all around.

Once I get adjustable control arms I can make the rear fitment a little more aggressive looking by adjusting the camber.


Rovos Wheels by Zachary Pounds, on Flickr


Rovos Wheels by Zachary Pounds, on Flickr


Rovos Wheels by Zachary Pounds, on Flickr


Garage Light Painting by Zachary Pounds, on Flickr

These wheels won't clear pp brakes without spacers?

Sent from my SAMSUNG-SM-N920A using Tapatalk

 

[phrenetiK]

read my sig. god i wish they would have given my moderator privilege in the wheel pics section....so many noobs quoting pictures :\

 

[Need4SpeedMotors]

These wheels won't clear pp brakes without spacers?

Sent from my SAMSUNG-SM-N920A using Tapatalk

No it needs the 3 mm spacer to clear properly

 

[zacpounds]

These wheels won't clear pp brakes without spacers?

No it needs the 3 mm spacer to clear properly

Let me clarify this. 20x10 will not clear the front without a 3mm spacer on a car with the Performance Pack brakes. I have 20x10's in the front and rear of the car. If you get 20x8.5's they will clear the front without a spacer as far as I know.

 

[Vanquisher]

Let me clarify this. 20x10 will not clear the front without a 3mm spacer on a car with the Performance Pack brakes. I have 20x10's in the front and rear of the car. If you get 20x8.5's they will clear the front without a spacer as far as I know.

Well. If your running 20x10 +38 and the 3mm spacer that. would make it et35. So then if you ran 20x10 +35 then you'd be ok? I was lookin at 20x10 et35 but I think I'm gonna run 20x9.5 et28 instead. And a 20x11 et39 rear.

 

[phrenetiK]

Well. If your running 20x10 +38 and the 3mm spacer that. would make it et35. So then if you ran 20x10 +35 then you'd be ok? I was lookin at 20x10 et35 but I think I'm gonna run 20x9.5 et28 instead. And a 20x11 et39 rear.

that's not how it works. it all depends on the wheels spoke design. if its deep dish it doesn't matter, and you will have to add a spacer

 

[Need4SpeedMotors]

Every wheel is different because of the following

Vehicle caliper sizing
X factor ( distance of space between back of the wheel to the caliper ) based on the wheel
The Wheel itself

So one fitment may work in a certain setup that the other wheel will not in the same specs.

 

[Grandmarshal]

is mine aggressive enough for this thread? addle:

 

[zacpounds]

is mine aggressive enough for this thread? addle:

meh.. it is nice but not aggressive by the definition of this thread.

The only way a car will be aggressive in this thread is if it has one or more of the following:
- offsets of the wheel that push the limits of fitment on the car. ie: sticking past the fender or needs camber to fit.
- tires so close to the fender that it goes beyond the standard realm of fitment
- lowered so much that even normal tire and wheel specs become so tight that you can't fit a finger through the gap.

Sponsored