A good front splitter that will work with Non PP car?

[EFI]

@EF1 Do you buy chance have a link or part number for the chin splitter you installed on your 2020 non PP car.

BD

https://www.tascaparts.com/oem-parts/ford-valance-panel-jr3z17d957ba

JR3Z-17D957-BA

Sponsored

 

[Buldawg76]

https://www.tascaparts.com/oem-parts/ford-valance-panel-jr3z17d957ba

JR3Z-17D957-BA

Thats what's on my car now from the factory but it got hit on the right side dinging it just a little. If I am going to replace it, I was wanting to get one more like the PP splitter.

Is that the one you put on your car?
I thought you found one that was similar to a PP that fit the non PP cars.

I was looking at this one as a direct replacement for mine now but cheaper than from a dealer.

https://www.americanmuscle.com/mustang-front-bumper-chin-spoiler-carbon-black-fomust18-22su.html

BD

 

[EFI]

Is that the one you put on your car?
I thought you found one that was similar to a PP that fit the non PP cars.

That's what the parts counter guy gave me, which I asked for the performance package model.

It's definitely different than what came on my car(301A GT). It's slightly bigger and it lines up with the PP underbelly (something that my original one didn't).

I only got this one to be able to pair with the PP underbelly for the brake cooling, not so much the looks.

 

[Buldawg76]

That's what the parts counter guy gave me, which I asked for the performance package model.

It's definitely different than what came on my car(301A GT). It's slightly bigger and it lines up with the PP underbelly (something that my original one didn't).

I only got this one to be able to pair with the PP underbelly for the brake cooling, not so much the looks.

Ok, Mine is a 201A ecoboost and I was wrong the on the part number that my parts buddy gave me for my car. It is JR3Z-17D957-AA not BA so it may be slightly different than what's on my car now.

Some research came up with this info

Try Tascaparts,com.
I believe these are 3 part numbers for Mustang front splitters...
JR3Z-17D957-AA is standard GT, no performance package
JR3Z-17D957-BA is GT Performance Package 1
JR3Z-17D957-CA is GT Performance Pack 2

From this thread.

2018 GT PP2 front splitter | 2015+ S550 Mustang Forum (GT, EcoBoost, GT350, GT500, Bullitt, Mach 1) - Mustang6G.com

BD

 

[geezer stang]

You can if you want to, but it's not required. It's just additional bracing that Ford deemed improved the driving characteristics of their performance model, but I can't really tell you how much difference it really makes.

i added the lower cross brace to my base 21 gt,along with the ford performance strut tower brace...diffinately makes a difference.

 

[ice445]

i added the lower cross brace to my base 21 gt,along with the ford performance strut tower brace...diffinately makes a difference.

The main reason to add it is for the drop down oil filter access door. The base cars have that plastic piece that needs to be removed, the PP version is just 1 screw and down it drops. Far superior.

 

[Biggus Dickus]

I'll go ahead and chime in- my shit got messed up by a demonic traffic cone at an HPDE, so I decided to replace EVERYTHING with new stuff : Here's my list:

PIECES:

JR3Z-17626-AA
Lower Splitter Mustang

JR3Z-17D957-CA
Upper Splitter - Mustang Performance Pack 2

JR3Z-17626-B
Under Cover

FR3Z-6P013-B
Insulator

HARDWARE:

-W704342-S300 Plastic Rivet 6.3 X 11.0 MM splitter 21
-W715060-S439 Fender Liner Retainer Screw splitter 12
-W705436-S300 Extension Panel Retainer splitter 8
-W704823-S439 AM/FM CD U-Nut splitter / belly pan 24
-W716345-S450B Wheel Opening Molding Retainer Screw splitter 10
-W715060-S450B Screw Belly Pan 15
-W716529-S900 Nut Belly pan 6
-W707291-S439 High Mount Lamp Nut belly pan 11
-W705546-S439 Nut under shield 4

I wanted to keep my PP2 car OEM/Stock, hence going this route.

 

[monte87]

You can if you want to, but it's not required. It's just additional bracing that Ford deemed improved the driving characteristics of their performance model, but I can't really tell you how much difference it really makes.

Hiya!!! What are these for??? It states I need 4 of them.
https://www.tascaparts.com/oem-parts/ford-under-cover-retainer-nut-w717220s300


Thanks Anthony

 

[emg75189]

I'll go ahead and chime in- my shit got messed up by a demonic traffic cone at an HPDE, so I decided to replace EVERYTHING with new stuff : Here's my list:

PIECES:

JR3Z-17626-AA
Lower Splitter Mustang

JR3Z-17D957-CA
Upper Splitter - Mustang Performance Pack 2

JR3Z-17626-B
Under Cover

FR3Z-6P013-B
Insulator

HARDWARE:

-W704342-S300 Plastic Rivet 6.3 X 11.0 MM splitter 21
-W715060-S439 Fender Liner Retainer Screw splitter 12
-W705436-S300 Extension Panel Retainer splitter 8
-W704823-S439 AM/FM CD U-Nut splitter / belly pan 24
-W716345-S450B Wheel Opening Molding Retainer Screw splitter 10
-W715060-S450B Screw Belly Pan 15
-W716529-S900 Nut Belly pan 6
-W707291-S439 High Mount Lamp Nut belly pan 11
-W705546-S439 Nut under shield 4

I wanted to keep my PP2 car OEM/Stock, hence going this route.

If I have a regular GT, non-pp...I would need all these parts, plus the pp2 fender liners? Does anyone have part numbers for the fender liners for the pp2?

 

[Howitzer]

If I have a regular GT, non-pp...I would need all these parts, plus the pp2 fender liners? Does anyone have part numbers for the fender liners for the pp2?

You can use the stock fender liners, you'll just have to cut them for the vent where the bellypan/rock guard goes. I have some of that outlined here when I did this to use the pp1 rock guard and splitter: https://www.mustang6g.com/forums/th...ack-2015-mustang-gt-build.188720/post-3808798

Here's a writeup from vorshlag on the 18+ base going to pp2. You'll also see where they just cut the fender liner: https://www.vorshlag.com/forums/for...aero-body/58939-2018-mustang-gt-pp2-undertray

Sponsored