3.5” Midrange Harnesses Completed!

[OF5.0]

Since I didn’t want to cut the stock harnesses for the 3.5” midrange door speakers and no supplier of a pre-made harness exists, I built the adapting harnesses:

Sponsored

 

[MegaG]

Are those the same connector the A-pillar tweeter uses?

 

[OF5.0]

Are those the same connector the A-pillar tweeter uses?

I’m not sure, because I haven’t seen them yet. But, in all honesty, I won’t be using the stock tweeter wiring or harnesses. They will be taped aside for future reconnection. If I had a photo of the separated tweeter harness, I could tell you.

 

[JJSSI]

They were the same on my Eco.

 

[BadHabit2Break]

so parts list and links to find them?

 

[Racemaster]

https://www.mustang6g.com/forums/threads/what-harness-for-tweeters.121334/#post-2532933

 

[BadHabit2Break]

thank you sir

 

[Tyeayo1]

I've found these to actually work...they aren't factory fitting, but it does slide over the oem connecter to make contact with the leads in the oem harness...it doesn't clip into place, but it's pretty snug, and finger of electrical tape tops it for piece of mind.

Sponsored