Sponsored

rear

  1. Help with aerodynamics

    Currently looking for a good rear diffuser & front splitter combo for my 2019 2.3L Going to be used on the track a lot so aero/downforce is top priority. Any reccomendations ?
  2. Differential and Rear Subframe Bushings, HELP NEEDED!

    Okay, so I am doing differential and rear subframe bushings because my differential bushings were extremely bad. I went ahead and picked up the bmr bushings for both. So far, I was able to get the rear subframe and differential out with no problem, but getting the bushings out is another...
  3. Anti Roll Bars DIY? Just pay someone.

    So I recently installed the front and rear anti roll bars from Whiteline. I really don't think which brand you go for matters. But the tutorials make it seem super easy. The gap between tutorial and reality is the biggest of any mod I have done to date. An absolute nightmare
  4. Creaking in Rear After Lowering

    Hey all, I've been reading around the forums for a while now, I just installed SR Performance non-Sport Lowering Springs on my 2019 Ecoboost non-PP. I haven't seen anything related to this so sorry if it's a repost. I've followed many of the suggestions on here about fixing squeaks and creaks...
  5. OEM Rear Bumper Fitment

    Word of advise, Never take off the rear bumper on these cars if you can help it. Did the TSB on the rear bumper due to gap issues and now the whole side rail does not stay in place with the design of the rail. Does anyone have any DIY fixes to get around this. Brand new side rail from ford aswell
  6. Is attaching the rear plate something I can do?

    So my car doesn’t have any rear holes drilled for the rear plate. There are little indents and the bag of screws in the trunk. Is this something I should have the dealer do or is it something I can do?
  7. I may have done it! Possibly decent looking caliper covers for rear

    Alright guys, so after months of searching across all the popular sites part sites, Instagram, Facebook, ebay, forums, etc, I think I've found the best looking caliper covers for the rears. I HATE the MGP covers especially against the look of the front Brembos of my PP. Not looking for...
  8. California New Taillight panel (GT/Pony deleted panel)

    Brand new. Never installed. Purchased from CJPonyparts but Sold my GT $70local pick up only LOCAL PICK UP ONLY $70 Fits all 6 gen mustangs 2015-20 PASADENA, CA 91104
  9. Seriously, does anyone else get this on the rear window?

    Seriously, does anyone else get this on the rear window?

  10. Installing Eibach Pro Kit lowering springs (Video)

    Hey All! just wanted to show a couple how-to videos we have on our YouTube channel. We plan to keep adding more video, so make sure to subscribe to channel!! . <——— the detailed install of how we did it! Thanks
  11. Easy way to activate differential cooler pump during fluid change?

    I am changing my rear diff fluid with BG lube from Optimum Performance. I would like to activate the cooler pump to make for a more complete fluid change. I don't have any type of tool that could activate R_DIFF_PUMP PID. What type of scan tool can do this? Also, could you just connect a 12V...
  12. Has anyone noticed these rear letters on shelbystore.com?

    So I noticed that some people put these Shelby letters on their trunks: Which is from the 2007-2014 model: http://www.shelbystore.com/product-p/7r3z-6342528-b.htm However, I had seen a picture of the GT350H and Super Snake and noticed that it comes with the letters in the trunk. However...
  13. [Potential DIY] How to re-wire rear side markers with turn signals?

    So I was thinking last weekend on how to re-rewire the rear side markers to operate with the tail turn signals. I have the DD markers and figure it would look slick. I figure we have a side turn signal in the mirror, why not in the rear as well? If anyone has tried this, please chime in...
  14. Clunk / Rattle Right Rear Suspension

    Surprise! :shocked: Another thread talking about the clunk/rattle from the rear of these cars. I've got the BMR CB005, Steeda Jacking Rails, Steeda Billet Shock Mounts, and Steeda non-adj Struts and shocks. The clunk/rattle - let's say crattle - only happens when the right rear wheel goes...
  15. Adjusting camber in the rear?

    Is the circled (red) bolt the correct bolt to adjust the camber in the rear? To make a long story short, I was in a fender bender and the upper control arm got broken on the rear passenger side (hydroplaned into a curb trying to miss another car and the force of impact broke it). Once they...
  16. Custom Rear Diffuser

    Simply testing the waters for something that I've been working on recently. If this is the wrong area to post this, admins please move. For some time lately I've been noticing the aftermarket rear diffusers that people seem to love for their rear bumpers. Some include cutting the bumper,some...
  17. KONI Yellow Sport Adjustable Struts And Shocks

    KONI Yellow Sport Adjustable Struts And Shocks [ame=""] KONI Yellow Sport Adjustable Front Strut KONI Yellow Sport Adjustable Rear Shock KONI Yellow Sport Adjustable Strut and Shock Kit NOW IN STOCK!!! KONI offers 2015-2016 V6, EcoBoost and GT Mustang owners a S550 specific...
  18. Boomba Racing Rear Vertical Links

    Available here: CLICK ME ---ORIGINAL POST--- Boomba Racing is excited announce our new Rear Vertical Links for the 2015+ Mustang! These links do wonders for improving the handling characteristics of your S550 Mustang. They work at eliminating wheel hop and aim towards providing a more...
  19. 2015 Ford Mustang ecoboost premium rear bumper complete

    2015 ford mustang original rear bumper complete with lamps and connectors Just Plug and play Littles scratches Easy To fix 

  20. $18,975 for GT350 Spoiler????

    Are you serious??!!!!!


Top