ess tuning

Hey guys, I got a 2015 Mustang and I’m installing the G3 kit. Everything is easy and simple but for some reason I can’t get the main bracket to sit properly. The bolt that goes to the thermostat doesn’t want to go in. I have the bottom two bolts loosely threaded in so I have enough slack to try...

Mustang GT 2018 (facelift), with ESS g2x kit, and g3x intercooler at present. but I am wondering what options are available for improved cooling as the IAT is running at 30 plus degrees on hot/warm days. I have looked online, but can’t seem to find any information, on whether there is a kit and...

Hey guys, 2018 10r80 with an ess g3r waiting to be installed. I’m unfortunately in college and on a budget so I can’t do my fuel system yet :(. Ended up getting a vmp boost a pump along with id1050x injectors, imrc lockouts, upr catch can, and ngk 6510 spark plugs so now I am all ready to go. I...

Pulley Diameter:6PK 120mm (8PSI) Intercooler Size:Standard G2 Volute color:Satin (standard) Blow Off Valve:Tial Q50 2psi Fuel Injectors:ID1050-XDS Fuel Pump:DW415 with S550 install kit Model year:15-16 (Gen.2) Pump Booster:Vortech MaxFlow FPB Supercharger Gear Type:High Precision Straight 2015...

Hi guys, i recently had some stainless power headers installed by a shop. It’s makes this odd knocking rattling sound every time I accelerate up a hill at about 2k rpm’s. since that occurrence I took it back to the shop and the guy pry the motor towards the driver side a bit due to us...

Hello all, I’m new to the forums as well as forced induction and would like insight! As the title says, I have 2022 manual GT PP1 with under 19,000 miles that I daily. I’m planning on adding a little more pep in its step by adding an ESS blower. My intentions are to get a Lund tune with the G2...

Hey gents, So a little something I've been working on with the car. Got two goals for her. 1) Get a 5.8-5.7 60-130 on 93 2) Get a sub 4.9 60-130 on E85 WITHOUT straying away from the 120mm pulley Current mods are as follows: 2020 Ford Mustang GT 10R80 Tuned by Wengerd. ESS G3X (with a...

I need to make a decision this week for a boost setup for my 2022 Mustang Gt A10 car. I have narrowed it down to ESS G3 Setup with a 125 MM pulley BAP and gt500 injectors, or a whipple stage 2 complete kit using whipples tune. I have read all the forms and I’m having a hard time deciding on...

Hello, can someone tell me if these 60-130 numbers look ok, especially in the temperature and Texas DA? I feel like the car should be a little faster than that ? Car did not spin at all - hooked and booked. MODS: 2019 Mustang GT (Gen 3 obviously) ESS G3 with G4 Intercooler, 100mm pulley...

I have a 2019 Mustang GT, and I’m trying to narrow down an issue that may be causing it to go 60-130 in measly 6.64s consistently, best I did was 6.42s, and that is TERRIBLE considering all the money and mods dumped into this car. Any and ALL criticism and advice on what the issue might be is...

I'm trying to learn more about the ESS G3 kit but I need some help getting some more information. I am looking to get the ESS G3 Tuner Kit for my S550 and my goal is the most horsepower that is still reliable, from what I've seen maybe around 600-650whp. I was looking to get a 120mm Pulley...

So I just got the ESS G3X installed on my 2019 10r80. Ive been researching to see what other peoples 60-130s were like because i noticed mine was a little higher than what i was expecting. Im on a 120mm pulley on 93 consistently getting medium to high 7s compared to other people where I've seen...

Hey everyone, I am planning on boosting my car soon and I need some advice. I am looking to get in the 600s without getting into the 700s WHP wise, but I dont really know which kit would be best for my power goal. my questions are, which injectors should I go with? Should I go with the...

Hey everyone I have a 17 FBO mt82 5.0 tuned by Lund. I’m getting the ESS g2 115 pulley. Right now I have Mickey Thompson street comp 285 in the back. I don’t dig the car often I do rolls. I don’t think I would hook with a 285 but tell me if I’m wrong. I was looking at the Mickey Thompson street...

Hello everyone, I am looking to change out the air filter on my ESS G3 supercharger on my Gen 3 coyote, I am going with the short filter that comes straight out of the supercharger (no tubing) I didn’t like that the filter was routed to the wheel well and it was getting filthy. I already got...

Hello everyone, I’m just going to get straight to the point, how much horsepower are ID1050x fuel injectors capable of supporting on a boosted/E85 3rd gen 5.0? I was running Sai Li dual pump with ID1050x injectors on E85 along with my ESS G3 110mm pulley and made 813 whp and that was it, the...

FSBO: 2021 Mustang GT Premium carbon fiber package. 16k mi. A10. ESS blower G3 with g4 intercooler, blower guard, tial bov, 105mm pulley, (aslo comes with 95mm,120mm w/belts), IMRC lockouts, Billit opg's/crank sprocket, fic 1300cc injectors, lethal performance return style fuel system with...

Hello everyone ! Anyone here running a Sai Li return style fuel system along the ESS Supercharger (or any boosted application) and what numbers are you seeing ? Is it possible to break 1000whp (they claim 1100whp) ? I have a 2019 Mustang GT A10R80 ESS G3 w/ G4 intercooler 110mm pulley 3” long...

Just recently made a switch from 93 to E85 on my boosted 19 s550 GT. Lund tuned the car however they said that it’s cutting fuel up at higher RPM 6800ish to 7500, they are saying that it must be my fuel rails, so my question is which upgraded fuel rails should I go with? I’m running ESS G3...