Guys, I had this suspension installed during the summer and have not had it on jack stands until now, so I got it in the air this weekend to do brake work for my track weekend coming up and am super frustrated with how it appears that they did the install. I am including pics for some other...
Guys, I had this suspension installed during the summer and have not had it on jack stands until now, so I got it in the air this weekend to do brake work for my track weekend coming up and am super frustrated with how it appears that they did the install. I am including pics for some other...
I'm getting significant vibration when braking above 50MPH. It's smooth below that. I read another post on this stating that the pad and rotors where replaced. The OP stated his rotors were warped.
Is there a chance that the rotors are not warped and it's just residue from the stock pads? If...
I'm looking to get some GLOC pads for my next track outing. Can I run the stock rears and R10 or R12 in the front? Not sure if it's even advisable to mismatch them.
I had this suspension installed and am fairly happy with it for street manners. I will track it alot in the fall but have some questions.
The car feels a little loose in the rear in turns while the front feels hooked up. The installer said he set the front sway bar to the soft setting and the...
2018 PP suspension with maximum motorsports camber plates installed(cost additional $250 plus install).
In excellent shape and they have about 12K miles.
PP comes with all you see in the pic:
Front strut/spring with camber plates
rear spring and shock
rear toe links
front and rear sway bars...
I had FRTP suspension and Steeda camber plates installed last week. Before I went to the alignment shop the installer measured the front at -3.25 camber. I settled at -2.7 front and -1.9 rear. I think the max for the rear is -2 without mods.
My question is, In a race setup what would the front...
I just upgraded suspension on my 2018 PP1 and have the stock suspension with Maximum motorsport camber plates installed that I am offering for sale. The suspension has 13K miles on it. This comes with front and rear sway bars too.
I prefer this to be a semi local pickup or can meet within a...
I had the FRTP and Steeda camber plates installed this week. The lowered looks good but that's it.
My target camber was Front -2.7 and rear -1.9. I picked my car up and got the sheet from the alignment shop and they got -2.0 up front and -1.8 in the rear. The installer says he sees the issue...
I know this is corvette related but wanted to share. I took my son on a graduation vacation to NCM for their corvette experience. We had a VIP tour of the museum and then back to the track for 3 classroom sessions and (3) 20 minute track session in a lead follow format. He had never driven a...
I had a small accident in a parking lot that damaged the back fender, valance, and left muffler.
Since then, I have a good amount of vibration over 80mph. Any ideas where this could be coming from?
I pulled the trigger today for this package( MFR3AM8A) and will have steeda camber plates added as well.
I cant wait to see how it handles on the track versus the PP i have now.
Next time at the track should be like learning the car all over, somewhat. I will have the new suspension, new track...
Can someone help me understand how the power is reduced in this app/tuner. If I chose 25% for all gears what does that mean it? Does it retard the timing? Does it lower the boost? I know very little about SCs but am also curious if you run it at lower levels will it add to the life of the SC.
I'm looking for recommendations for a possible installer here. Suggestions?
I'm considering the Whipple 3.0 stage 2. What's the typical cost for an installation?
I'm new to FI but getting pulled on straights at the track has me looking. ;)
David
For those that have installed this package, how hard is it to do? Is this something an average
guy can do with normal tools? I also would be adding Steeda camber plates to the struts.
Once installed, how long does it take for the suspension to settle? I'm trying to understand for alignment...
I was at Barbers this weekend and had a really good run both days.
The only thing that I kept having to address was tire pressure. The stock MPS4s
got greasy after about 15 minutes and measured 37 PSI hot. I started the weekend
at 32 cold and bled them down after each session throughout the...
I installed a UPR catch can today and while removing the intake manifold cover one of the nuts fell down into the front engine area. Is there any concern here with it getting into the serpentine belts or anything else?
Also, what is the purpose for it? Does it really need to be on there?
Guys,
This is going to be a little of a rant out of frustration. I had maximum motorsport camber plates installed not to long ago and the original installer/alignment guy could not get more than about -1.9 camber up front and 1.5 in the rear. The right side would go up to 2.4 but I wanted them...