Anyone knows of one or has fabbed one themselves ? Ford Performance intake that is part of Ford Performance power package for 18+ car and I think is standard on Bullit / Mach 1 / GT350.
Four SVE SP2 19"x11" wheels
I think most here are familiar with them - they're PP2 wheel replicas but quite a bit lighter
Color : Glass Graphite
ET: 50mm (all four wheels - front will require 25 mm spacer to fit and possibly some negative camber - this is square fitment that allows to rotate...
Anyone has an idea what could generate "Suspension Fault - Speed Limited to 80mph" message ?
I made it go away but given situation I'm in, I'd rather not count on luck. Don't have OBD scanner with me either but probably could get one if needed.
I've been considering getting a DSC Sport controller for Magneride for a quite while, I finally got the chance to use a borrowed one for a bit and now own one so though I'd write something for those that might be interested in it.
For disclosure - I am not a suspension setup expert by any...
Pair set of 25mm bolt on spacers - I bought it from LMR (https://lmr.com/item/LRS-5450AK/mustang-1-wheel-spacer-kit-black-15-18) and never ended up using it - Magneride cars studs are longer than non-MR so they were sticking out too far (I tried to trial fit one of them on the hub and wheel on...
ZL1 Addons wicker bill - exactly this model " https://zl1addons.com/products/mustang-18-19-performance-pack-1-wicker-bill
Made to fit 18-21 PP1 spoler/wing. It's brand new and has never been installed - you can on the picture that protective film has not been removed, neither mounting hardware...
If someone has Motortend on Demand subscription, suggest watching most recent episode of Engine Masters.
They've ran LS3 on engine dyno with 87, 91 pump gas, 110 and 113 race gas and E85 - adjusting timing and AFR for max power/torque.
Results can obviously vary for different engines with...
Thought I'd a quick review since I have installed these and went through an alignment with these. (for those that don't don't OEM rear alignment adjustment on these car really sucks - it's inboard mount bolt of the camber arm sliding horizontally in the slot in subframe - really inaccurate if...
What is the right way to get to forward bolt on RLCAs ? I have knuckle out, can likely get the camber link out too, would rather not remove half shafts.
Manual talks about removing exhaust but I don't see where the exhaust would be in the way of accessing that bolt...
Anyone figured out CAN bus IDs for things like Brake Pressure and Steering Wheel Angle ?
S197 presets don't seem to work (I'll experiment some more but at least first shot wasn't successful). Google search brings nothing, search on the forum is mostly someone asking question and others not...
Axis Model 5 wheels in Gunmetal Gray color 5x114.3 bolt pattern
They are matching size / offset for '15-20 Mustang GT PP1. Will fit any Mustang model (V6, GT / Ecoboost) except for GT350 / GT500. Will fit over PP brakes.
Fronts are 9" width / ET 45mm, Rears are 9.5" width / ET 47mm (slightly...
BMR Front Adjustable Sway Bar - P/N SB044R - $150, in person pick up only (45069)
Comes as it does from BMR - with mount and polyurethane bushings. Has been on the car for 4 month (switched over to Ford Performance bar (part of Magnaride Handling Package). Bushings and the bar are in perfect...
All - have an issue and need some ideas how to solve it - as you can see on the pic, end link (Steeda) is installed on the inside of the sway bar - for the reason of not fitting on the outside (not enough clearance vs. strut) - BMR endlink wouldn't fit eiher, stock one - maybe, but mine are...
Anyone had this problem ? My car had damper on the rear passenger side bolt - removed per Steeda's instruction but the bushing underneath has a different pattern than the bushing support.... What do I do - just installed it over it anyway ?
I am trying to remove hubs to replace the studs with the long ARP ones - hubs (since car has Magneride) are 4 bolts style (like GT350), not the ones held with large 36 mm nut. After undoing these 4 bolts it should technically come off - left one did (see pics), right one is stuck - most likely...
I remember there was a thread about it but could not find (so mods - feel free to move this post).
It looks like a DSC Sport now has a controller / calibration available for GT (previously it was GT350/GT350R only). It is something that might be in my future - I have a local dealer here that is...
Got a set of SVE SP2 wheels, 19"x11" - they're supposed to be ET50, one is marked ET 52.3 - no idea if that's what wheel actually measures - anyone ever seen anything like this ?
A word of warning of how you're going to be treated if something goes wrong... Here's story :
- Ordered sway bar from AM, they shipped it quick
- On the of delivery their package and one more also coming through UPS shows delivered to front door at 3:04pm. I happen to be home and have outdoor...