Search results

I noticed a thread where someone mentioned changing out the fluid when new, just like changing out engine oil on a new engine during break in. Is that really a thing? I‘ve never heard of that before, and I believe normally not done till 100K. Right now I‘m sitting at 6700 miles. Also saw a...

Hi Guys, Sorry I know there have been other threads, here and other Mustang groups. I've looked through all and decided this seems the best; 1. Drain radiator -- 5/16" hose attached to petcock run to bucket 2. Remove thermostat from housing and replace housing (first pull lower radiator...

Hi All, It’s been 6 years so it’s that time. To reach the shuttle cock I’m sure the belly pan need to be removed. Can’t remember, can the belly pan come off without the splitter first being pulled off? I hate the idea of unsnapping the plastic lock tabs, always afraid of them breaking off. I...

For anyone that installed these…I just put these in, now noticing 1.5” higher. Anyone have this happen? Supposed to be for Magneride OEM perch.

Hi folks, I have a pair of said camber plates to install. Issue is I have no idea how to adjust them afterwards so that I can drive a few miles to get an alignment. Any help would be appreciated!

After a lot of back and forth, figuring out finances, and some “spirited” discussions with the wife, I’ve sent MacMulkin a deposit. As the deposit is refundable until an order is placed, I’ve got plenty of time to consider something else should I get impatient or if something else comes up in...

Hi Guys, Recently tackled my first suspension mod, rear LCA Cortex monoball bushings. Ford calls out the bolts as single use, was informed only due to liability for not cleaning off old threadlocker and reapplying. In the end I just replaced all but the ones with blue loctite. Why? One had...

Hi All, Ive just removed my rear lower control arm and Magneride strut. Does the factory shop manual recommend replacing all the bolts? Also they all had loctite. Should that all be removed and replace? I’m trying to get an account with service so I can access shop manuals but its pending.

Hi All, I see pricing $229 for a case. Really? Think I paid $150 last year at the dealer. Tempted by Amazon at $139, but is it counterfeit? Legit places that have reasonable pricing? Not looking for the cheapest, just want to be confident in the oil short of $229 a case.

Hi All, I’m waiting for Cortex LCA bushing to come in. I’ve read BMR‘s write up, and although it looks straightforward, asking for those who’ve done it have there been frustrating complications. I would be doing it with Quickjacks on my own, the writeups indicate a second set of qualified...

Hi All, Hoping someone can chime in on this. I passed safety but failed emissions because the monitors weren't ready. I pulled the battery at one point and had driven a bit so thought nothing of it. Subsequently, I figured out how to use Forscan, ran the car as advised to try to set the...

Was wondering if anyone replaced the crap center 3.5” speaker with good results. Read through the car stereo thread about disconnecting it, which I did, and agree it’s a sonic improvement, but somehow I find I like the image a bit more centered vs coming from the left side. I read some put in...

Hi All, Any recommendations on junkyards for S550 parts? Right now looking for rear interior plastic to the sides of the seats, but good to know for parts in general.

Hi Folks, Looking for the GT350 version as stated, along with the extension sleeve.

Hi All, Airbag light came on, stays on, ran scan and shows the above code. From my overall Google search, sounds like it COULD be passenger seat rail position sensor, but not specific to a Ford Mustang (2018). Anyone have insight before I just go to the dealer? Rather try to fix on my own...

Hi Folks, Wanting to get a QR bracket for my fire extinguisher. Like the title says, is the Brey Krause any better than anyone else’ s for $300 vs $200? TNX!

I’m getting ready to flush my brake fluid, as I purchased a 2018 vehicle last year and have no idea if it was ever flushed. Found you can get a cheap tester, looked up some youtube videos as I wondered how accurate they were. I was really impressed with this video: Reason being, most videos...

Hi All, I’ll preface by saying I am a total newb to being on track, never been. Trying to get ready for this year, fingers crossed! My dilemna is with harnesses, doing it correctly as to be safe and pass any tech inspection. I have been doing a lot of searching and I”ve reached this...

Hi All, Looking through all the threads, the MGW short shifter seems like the best built and approved upgraded unit. Looking at the new video from MGW it looks like one well built, precision made unit. However, I did see a youtube guy who runs a shop who ultimately removed it due to the...

Hi All, Noticed some vendors seem to have HAD these. Threads from/about Signature Wheels, ZL1 Add Ons, TiKore. Yet nowhere do I see these for sale. Any clues who’s actually selling these now in end of 2021? Thanks!