Search results

Never had a supercharged car before maybe dumb questions but I dont want any BS to happen to my motor because i didn't spend a couple extra $ to keep it from blowing up lol . Soo my question is do I need breathers on the driver side and the passenger side? Also do I need a oil cap breather as well?

I know there has to be a thread on 18 intakes with a vortech/paxton or procharger can't seem to find it. Can someone send the link? Thanks

Getting my blower put on. Do I need to gut my cats or go catless or will I be ok with high flow cats?

Anybody running V7JT vortech blower? Anybody using a torque booster? What are your thoughts? Hp and Tq numbers?. I just bought this step up with 1000 pound injectors. Anybody with similar mods?

Wheel hop is destroying my car. I've broken the passenger side diff bolts twice, broken driverside haveshaft twice, also broke 3rd gear In the MT82. I have the steeds red diff bushings, (thinking about putting the black ones in) BMR cradle lockout and BMR links. Is there a kit I can buy that...

Noticed my oil temp moves a little towards the warm side when I did about 2 to 3 hard pulls on the highway. Not in the yellow and no where near the red but it diffenitly moved towards the warm side. Should I be concerned? Is that normal. I know some may say thats to be expected because you did...

Broke 3rd gear in my old mt82. Got a new one now. Is there a break in period for a new transmission?

Last mt82 broke 3rd gear. Is there a break period for a new transmission? I haven't beat on it but I have been getting on a little bit from time to time. About 500 miles on it so far

I bought a used Driveshaft . Driveshaft vibrating over 60mph. Not to bad. I Noticed my mirror was shaking a little while on the highway. Put about 500 miles on the car since I had the driveshaft installed. I'm gonna get my driveshaft re clocked. Will the vibration cause any issues with...

What's the difference between the 2015 coyotea and the 2018 coyotes? Besides the intake? Did they add oil pump and crank sprocket gears to the 18s because I see people revving all the way to 8 grand with them.

Anybody running a V7-JT vortech blower? Pros and cons? Thinking about getting one

Broke 3rd gear lastnight shifting from 2nd to 3rd. Thank god I was still able to drive home. All the other gears work but I can hear metal bouncing around inside the transmission. This is my only car. Will I be able to drive back and forth to work until I get it fixed? I have a RST clutch...

Anybody running a vortech, procharger or Paxton with the 373 gears? I'm not taking my car to the track at all. I herd people change them because before the finish you have to switch into 5th. Gonna be a street car only. Couple rolls and may a couple digs on the street. I'd figure whatever I...

I herd the 18 intake will bolt on a 15-17 coyote motor. I also herd the 18 intake makes more power or flows better then the gt350 intake. Is that true? Has anybody tried it yet? Damn sure a whole lot cheaper then a gt350 intake.

What's the difference? Why does pro charger cost more? If I go with the procharger I see they have a couple of different head unit. P1sc p1x d1. Which one should I go with? Right now I have longtubes a Lund tune and cold air.

Anybody running on 3 turbo kit? Any issues with heat ? Any issues period? 1/4 times dyno hp and tq numbers?

New clutch same steel McLoud flywheel but I had the flywheel resurfaced. Any tips for the break period? Thanks

Pros and cons of aluminum flywheel and a steel flywheel? What should I go with it? Rst clutch is on the way can't decide on a flywheel

First time I cleaned my JLT filter in 40,000 miles. Looking pretty dark so I decided to buy the K@N recharge kit. I used the degreaser, let it dry and now I'm debating on using the oil. I herd the oil can clog up you mass air sensor. So my question is should I apply the air filter oil or not...

Just bought a used dynotech aluminum driveshaft. Will I be able to notice any difference between the aluminum and the stock driveshaft? One of my friends told my dyno tech makes one of the best driveshaft it couldn't give me a reason why lol. I k ow there customer service sucks. Couldn't get...