Search results

Problem solved: I installed Borla Sport mufflers with an x-pipe. No quiet mode, heavenly music all the time.😃👍👍

Curious as to the cost of leather for a cloth recaro interior

This worked great for me. Really tightened up the shifter

I used stainless 8-32 allen bolts with washers and aviation locknuts on the back side (not nylock) it looks custom to me.

Bump

Picked up a nail in the sidewall so it was off to get 2 new rear tires. Ah well they were going to need it soon anyway.

Awesome wheels

My shelby went on easily and I had to use loctite. You will have to set it up so the reverse lockout collar works correctly. I Can’t really tell from your photo if the threads are messed up or not. Call whoever you bought it from and ask them about it. That way if it’s messed up you have a...

I used a 90 and 45 degree small diameter.

I just did this a few weeks ago with that starter button. The factory button is tight in there. They advise using a pick. I used a few different shaped picks. If you’re careful you can do it without destroying anything. Go slow and have patience it will come out. If you try to rip it out you...

When I removed my MMD Foose spoiler I used screws and 3m tape. It was a real effort… I mean fight to get it off after removing the screws. But I did have the screws installed to provide clamping force while the tape set. I am sure it would have held up to “Mexico” speeds without the screws. But...

I had removed the bass roll off after replacing my speakers and it wasn’t too bad changing that code. Tom was reprogramming for over an hour. He definitely knows what he was doing. It probably would have taken me a month.

I just a few weeks ago did Haress by Hextall’s stereo swap. I was amazed at how much programming he had to do. So far so good, it’s a huge difference between this and my base stereo. I would definitely recommend going this route if you want to upgrade. Pete

They’re not my thing but everyone has different tastes. It’s your car and if you want to add side scoops then do it. Customization is a personal thing.

I have a Holley no tune listed in the for sale section

I would remove the airbag and all the trim covers then look for pinched or shorted wires. Check for burn marks where something may have shorted and any loose connections. If you find pinched wires check for continuity and repair as needed. I remenber there being a lot of flash metal from the...

Wish you were closer, I would definitely be interested. I’m in Raleigh.

Don’t like the grille, the rear end is. cartoonish and not a fan of the dash, the dash looks nothing like a muscle car.

Attached to the passenger seat front bolts

See photos