Search results

I installed 2018 premium door panels on my 2015 base. However the wire connector does not fit the 2018 socket , and now the lock/unlock buttons cant work. Is there anything I can do to retro fit so I can at least get the lock buttons cant to work? i dont have power seats. Notice on the last...

On premium trims the center console and door panels are wrapped with soft material and was wondering if the plastic at rear seat is also soft?

I have ordered 2018 door panels for my 2015 V6 and noticed that there is a place for a second speaker on the upper part of the panel. How could I go about installing that upper speaker? My base now only has one speaker down on the lower part of the door.

A while ago a shop installed sync 3 on my base V6. I remember the install took a few visits to get it right, I think some programming was needed. I was interested in installing the GT350 sync 3 front panel, the one with black toggle switches and was wondering if anyone knows if it can work out...

For the GT350/500 Ford suggests to wait for the engine and oil to reach operating temperature before driving hard. I typically don’t drive hard, but since I installed the digital cluster and oil temp & pressure gauge, I can see how the details. So now until the oil/engine reach operating...

I am ready to get the Mach 1 OEM wheels for my V6. I am a casual driver and have no issues with my OEM 17” wheels as well with the OEM Hankook tired. I just like the sTyle of the Mach 1 wheels. 1. Will I feel any difference in driving ? 2. What tires would you recommend? 3. Anything I should...

I am interested in installing the 2018 frameless rear view mirror on my 2015 V6. Was wondering if anyone is aware if the mirrors are compatible and if I will be able to install on the 2015 V6? On the pics below, I have the base mirror in a thick black frame.

While I was at QuickLane, they suggested me to do an ethanol fuel system treatment on my OEM fuel system for $99. Was wondering what is your opinion about this product and maintenance procedure? I never heard about this.

So I am planning to install bushings and inserts to tackle wheel hop, using popular aftermarket parts from Steeda or maybe BMR. My question is for a casual driver who doesn’t race or care to drive super fast, what differences would I expect to see? I mainly want to experience the install and...

I installed a digital cluster and it is rattling. I can stop the rattling with a holding firm push on the cluster. What do you think could help me fix this?

I ordered a new Motocraft tpms sensor and had Walmart install it on the tire, they were not able to detect the sensor. I have a tool as well, I put the car in tpms learning mode by pressing the brake and starting 3 times twice. The new sensor will not register, when I try to register the other...

I am interested in a leather stitched console trim panel. As far as I know the 2018+ premium models had this. Would this fit on a 2015 base V6? The Ford part site says it will for onpy 2018+ models...

Installed a gas pressure gauge and noticed the gas psi at idle is 57 psi and was wondering what is the normal operating gas psi?

Where can I tap into for the following ? Yellow: 12v Constant Source (+) Red: 12v Ignition Switched Source (+) Orange: 12v Headlight Switched Source (+)

Today I planned to replace all my o2 sensors. Started on the passenger side, after lot of effort, I was able to replace the downstream sensor as I guess the sensor was kind of seized after 123K miles. I could not for the life of me remove the upstream sensor, the area was kind of tight and...

When the car is cold, typically in the morning , after starting and waiting for the rpms to drop from 1100 to about 800 and when I put the car on 1st and start rolling, the car starts stuttering/stalling and have to compensate more gas. This happens only for about a mile and then everything is...

I read that the Mach 1 has a subframe V brace and was wondering what is that and what does it do? Was wondering what is the OEM part number or an aftermarket equivalent as I was interested to consider installing on my 2015 V6.

I am interested in installing an oil pressure and oil temp gauge on my 2015 base V6. Ideally, I would prefer the OEM gauges, but reading around for the V6 it is kind of challenging to get it to work with OEM. Was wondering, what aftermarket options are out there, that probably would be more...

I really like the look of the big calipers on all 4 wheels on the s650. Was wondering what would it take to install all calipers on a s550? Are their any installation guides available? I do have the stock ORM 17 inch rims.

Found out today that there are options in increasing the steering angle and was wondering what do you think and what are your experiences? I never thought about needing more angle but it would be nice to have more angle when I am in tight spots to possible avoid 2 step uturns. I saw that to...