Search results

Hello I'm nearing 700rwhp and hear people should upgrade their oil pump gear and timing sprocket. I also hear people upgrade the chain guides. Some people say this mod isn't necessary on the 2015 so I'm debating. Should I upgrade these? I don't have the money to waste but if people motors are...

I am taking the passenger header off my 15 and am down to the top front bolt. The AC line is in my way and I cant seem to see a way to get it off. Can anyone tell me how to get the front top bolt off the passenger header?

I'm installing my long tube headers Monday. Rest of mods are in my sig. I think I will update my oil pump gear and crank sprocket next followed by e85 fuel system and tune. Will you share any mods you have done and horsepower numbers?

My first two attempts at the track with this car have been pretty terrible. First time out I snapped my half shaft on launch. Second time I ran 14.77 spinning bad through first 3 gears. 3rd attempt Felt like a good launch (On 315 Nitto Invo's) but my SES light popped on I let off the gas...

I'm pretty late to the game on a build thread. Haven't had a sports car in 10 years, so learning the latest and greatest changes. I'll try to re-create my build through these posts in order of how things have transpired. I bought my car July 4, 2015. MOD List: Suspension Mods: 1)...

I'm getting viking shocks soon. Can anyone point me in the right direction to learn how to adjust them?

Thank you Terry for never sleeping and hooking me up with insane deals keeping me broke lol. You rock man. I appreciate you looking out for us, and being there around the clock!

Price was right bit the bullet, decided to buy the pypes headers with cats. Can anyone tell me what to expect? Can I use factory studs? Should I use factory gasket? Any write ups/videos of this particular header install? I have roush ab with amr h pipe currently. Will everything bolt right...

http://www.protuninglab.com/20fomu5v8sts.html?utm_source=googlepepla&utm_medium=adwords&id=140848870378 250 bucks!?

So it looks like the Mickey Thompson ET Street II are the wheels to get. . . I see on their website getting these for a 17 inch rim is cheapest way to go. As you go 18, 19, 20 the wheel gets more expensive by over $100 per tire. I am only going to use these wheels a couple times a year...

Hello, I havent had a radar detector in 12 years or so and it sucked. Squelched all the time. Can anyone tell me a decent sub 200 radar detector?

Hello, I hear mixed things here about the manual transmission. This is the MT82 in the '15's right? What should I know? Is there something I should be doing to my transmission for my power level? Should I leave it alone until or IF something breaks? Then what? Change whole transmission...

Please post here with how much boost you are running on your '15/'16 GT and what engine mods if any you have done ie oil pump gears. Thank you

Just wanted to say thank you to Jeremy at Kesatie Motorsports. I went and dynoed my car there this weekend and had a great experience. Very personable guy, willing to bend over backwards to lend a hand. Great pricing, a fellow mustang enthusiast, emailed me all dyno info, great experience...

Imy currently running 315x35x20 nitto invos, and have been out to the track once with this car and had a hell of a time getting traction. I'm trying to find some cheap rims to mount some drag radials on like 2x a year to go to track make some runs, go home put my street tires back on...

Didn't have much time, brother was with me he had to go to work. We drove 45 minutes to dyno, no cooling time other than to strap the car down, with 75mm pulley ruNing torco put down 665rwhp/589tq at 6500rpm. Car was still making power. It registered at 13lbs of boost. He didn't know I...

I'm curious of real world gains found by putting long tubes on. Wondering if it would be worth all the money and time

I'm working with Lund to tune my car with Torco/75mm pulley on 93 octane. Where is the cheapest place to get it? So far Amazon is cheapest I found. Thank you

I have DSS Drive shaft and half shafts, Since installing the drive shaft, when I'm just touching gas driving normally I hear a slight whine (might be wrong) sounds like coming from dead center of car where drive shaft is. Is this normal with DSS Aluminum drive shaft or should I be looking...

Roush said change the oil in the tvs every 100k. Does having a smaller pulley twice the time between oil changes? Like with 60mm pulley would you need to change oil every 50k?