Search results

Is this normal? I got a cylinder misfire code, pulled the plug for cylinder 4, found a lil oil on the thread, wiped it off, double checked gapping to make sure was .030 (was a hair off so tightned gap a little) put plug back in, cleared code, all seems fine now. This something I should have...

Hey all, I don't now anything about this so please fill me in on what I should look for/expect to pay. My 60 foots are sacking on 315 nitto invos, so I'm looking to get some rims and slicks or drag radials. I'm thinking of getting drag radials to put on my car drive to the track make a...

I'm putting 75mm pulley on, revised tune, and going to add torco/Lucas to my fill ups. Any experience with this? Anything to know/look for?

Hello, Does anyone know where I can find out what the 50th anniversary rims weigh on the 2015 mustang gt? Thank you

Searching around, but is it possible to upgrade the 2015 models to sync 3? I connected to my wifi told it to install updates, but it's looking for a USB drive. Any guidance?

Specs in sig. See attached for pics. The tires help hook great, and are very smooth. I love the way the rims look with my stripes.

Just curious. All bolts are tight, but when under load now car gets a little wobbly around 100. Is it possible I need my alignment checked? I don't know much about alignment but i did pull the piece the rotors attach to in order to have plenty of room to slide the axles in. Thoughts?

What is this rating supposed to show? Is this the octane rating the car is actively seeing?

Should I worry about this? I got error P0300 multiple cylinder misfire and miss fire codes on cylinder 4 and 7. I got on it this morning through first and second car sputtered a little and I saw the check engine light. I limped it home and a few seconds later engine light went off car was...

First time with car (mods in sig) at the track this evening. I did small burn out (person guided me out of wet box) and let car roll forward. I staged fine, but when I went to go, car wouldn't move. 1st Gear was like it was in neutral. If I let off clutch only car will go forward and...

Are there any issues running 275x35x20 up front and 315x35x20 in the rear 10" rims all the way around? I got a new wheel/tire combo but am trying to decide what to do. My stupid TPMS triggers everytime I drive. Says failure. The tire shop is sending out new sensors to me, but I think when I go...

Hello, I heard there is a 500 to 1000 mile break in period, does the clutch still chatter beyond that? I have about 600, and the clutch chatters (makes like a scratching noise) often. A few times when I went to pass someone and went half to 3/4 throttle it was almost as if the clutch was...

How do you compress the front brake calipers? Most brakes I just throw a clamp on and tighten it. These are different. I think 4 piston. I have the 2015 gt premium. Any links to how to videos or anything? Thanks

Hey there, So my mustang is getting up there power wise, and I think looks pretty good, but has the stock spoiler, and from the rear the car looks weak. Any ideas on a nice looking rear spoiler which isn't a ton of money and doesn't require drilling? I would like to use the factory bolt...

Was driving yesterday, saw a BMW driving like a jerk weaving through cars coming up in my rear view. He went to go around me, noticed it was an M5, so I hit the gas, pulled about 50 car lengths pretty quickly. I slowed down, and he kept on the gas, he was doing like 130mph at this point, saw him...

I'm going to put in the low temp thermostat, and wondering what you guys think about Lucas super coolant? Can I use this in the intercooler reservoir as well as the engine? Think it will help lower iat temps?

So I installed new clutch, dss drive shaft, h pipe, and tires/rims. Took car for a drive yesterday and when I am in say 5th at 40mph, give car a little gas, I hear a little grinding sound almost like my drive shaft barely rubbing on the safety loop or something. Maybe it sounds more like...

Hey all, this didn't come with any instructions. What I gather so far is the following 1 install the rear adapter plate and tighten to 57 ft lbs. 2 install front adapter plate tighten the big bolts with blue loctite to 70ft lbs. How do you keep transmission from moving while tightening...

I'm going to be putting in a DSS drive shaft soon; I didn't see the torque specs on the CJ Pony parts youtube vids; does anyone know what they are?

First question is the coolant for the inter cooler on a roush super charger setup completely separate from the engine coolant? Second question is what kind of antifreeze do you put in both/either? Is liquid ice, or something worth it or simple auto zone anti freeze fine?