What did you do to your Mach 1 today

[skinnyb]

Did you get the straight cut gears?

I did. I LOVE them. Got a friend with the quiet ones. They are nice too.

Sponsored

 

[Mjschneidy]

Cleaned all the track smutz off after two days of running the snot out of it! Annual Mohawk Track event at Gingerman South Haven MI. Ran 30 gal of fuel through it and lots of smiles per gallon. These cars hold there own with GT350’s, 500’s, and Boss302’s.

 

[GTP]

Tell us more about this Mohawk event. I hadn't heard of it before. I like to go to Gingerman each year, so far with CGI or PSI.

 

[MACHtobers Very Own]

Installed my diode ss3 fog lights in the grill with the @Mach1NA install kit. Turned out great!

 

[Noleftist]

Are they to see with/do they light up the road really well or, are they more to be seen so people can see you?

 

[MACHtobers Very Own]

Are they to see with/do they light up the road really well or, are they more to be seen so people can see you?

This is for aesthetics/looks. Hated the empty circles since day 1.
I haven't driven at night yet so I'll report back when I do

 

[Mjschneidy]

Tell us more about this Mohawk event. I hadn't heard of it before. I like to go to Gingerman each year, so far with CGI or PSI.

Great annual event of mostly mustangs. Mohawk Track Experience

Attendance was down a bit this year due to conflicts with the crews that are supporting Mustang Challenge, names you’d recognize from the TMO.

 

[skinnyb]

Battery time. Went out tonight to go out for a bit and CLICK... 5 years old, I can't complain. I have kept on a tender during the week my entire ownership, but I left off this week. SO I guess it was about time. 200 bucks later, and all is well . And thank goodness for a Noco jump pack. Those things are life savers..

 

[Mach1NA]

Are they to see with/do they light up the road really well or, are they more to be seen so people can see you?

The fog lights enhance night time visibilty. Diode Dynamics SS3's have different options ranging from being road legal and off road only. It just depends on how you want to use them.

For more info:
https://www.mustang6g.com/forums/th...-mach-1-fog-light-adapters-3d-printed.225903/

 

[JFALK68]

Battery time. Went out tonight to go out for a bit and CLICK... 5 years old, I can't complain. I have kept on a tender during the week my entire ownership, but I left off this week. SO I guess it was about time. 200 bucks later, and all is well . And thank goodness for a Noco jump pack. Those things are life savers..

Same thing happen to me last week. I only had the battery 4 years. While it was getting replaced at the dealer had the recall done for fuel pump issue.

 

[skinnyb]

A little yard time with the boys. Good day to be out and about.

 

[Mach 307]

Did a pretty nerdy one today After comparing the factory As-Built data from 32 unique 2021–2023 Mach 1s (14 Canadian-market and 18 U.S.-market cars), I finished converting my Canadian-market car’s programmable configuration to the corresponding U.S.-market spec in FORScan. Between the two markets, I identified 11 verified As-Built differences spread across the IPMA, IPC, BdyCM, ACM, TCU, and APIM, and changed only those market-specific values. I then disconnected, started a fresh FORScan session, reread everything to confirm the changes, and finished with a completely clean DTC scan. Pretty cool to finally have the U.S.-spec RSD Mach 1 configuration I wanted, all done in my garage.

https://www.mustang6g.com/forums/th...adian-to-u-s-forscan-conversion-guide.232543/

 

[RowdyRam]

Did a pretty nerdy one today After comparing the factory As-Built data from 32 unique 2021–2023 Mach 1s (14 Canadian-market and 18 U.S.-market cars), I finished converting my Canadian-market car’s programmable configuration to the corresponding U.S.-market spec in FORScan. Between the two markets, I identified 11 verified As-Built differences spread across the IPMA, IPC, BdyCM, ACM, TCU, and APIM, and changed only those market-specific values. I then disconnected, started a fresh FORScan session, reread everything to confirm the changes, and finished with a completely clean DTC scan. Pretty cool to finally have the U.S.-spec RSD Mach 1 configuration I wanted, all done in my garage.

I admire your perserverence. Reading through quite a few of your posts about making your car "yours," I notice that you don't do things half-way.

Hopefully now you can enjoy what you've done.

 

[BullittBoy]

In stalled my Steeda Stop the Hop Kit this weekend. Not too bad of a job on Quick Jacks. Also installed my Course Phone mount and while I had the radio bezel popped open, I routed the USB power cable behind it so it comes out just next to the USB outlet on the lower left side and then up on the upper right side to the phone mag mount. Super clean with no cable exposed except on the sides for just an inch or two to plug it in.

 

[Mach 307]

I admire your perserverence. Reading through quite a few of your posts about making your car "yours," I notice that you don't do things half-way.

Hopefully now you can enjoy what you've done.

Thank you, I really appreciate the kind words!

Sponsored