What did you do to your Mach 1 today

[skinnyb]

Car wash day. Cleaned up my twin

Sponsored

 

[The Demon]

https://www.facebook.com/marketplace/item/1053976009472353/?mibextid=dXMIcH

Local guy sells this kit. I had him do the install.

I don’t use Facebook but I forwarded it to my wife and it looks like the link no longer exists?

 

[TallyMach1]

Cleaned her up yesterday and went to two car shows today.

 

[skinnyb]

Cleaned her up yesterday and went to two car shows today.

Man you make me miss my GBM GT I traded for my M1. I do truly miss the color, although the M1 is so much more car

 

[I Bleed Ford Blue]

Man you make me miss my GBM GT I traded for my M1. I do truly miss the color, although the M1 is so much more car

I had 17 GB gt vert that I traded for my GBM mach 1. I like the color so much I got another one the same color.

 

[skinnyb]

I had 17 GB gt vert that I traded for my GBM mach 1. I like the color so much I got another one the same color.

Yeah I looked for a GBM Mach but this one kinda fell in my lap. Local, really low miles, it just hit all the buttons for what I wanted. Minus the color :( But, FJG is iconic Mach 1 color so I like it...

 

[gsxr1300]

I don’t use Facebook but I forwarded it to my wife and it looks like the link no longer exists?

he has them on ebay now
2021-2023 Mustang Mach1 fog lights kit

 

[tonykej]

Hey everyone, this is my first post, so I just wanted to say hello and share a picture of my Mach 1 after getting a ceramic coating and PPF protection film done today.

 

[Boyd]

I didnt like that ebay fog light kit when I bought it. Lights are cheap, very poor beam, using leds is horrible because of the reflector.

Big ugly switch, gotta drill hole in dash panel. Seller suggests relay and wiring tuck into sunglass holder.

It has to be for appearance only because the light is so bad. Light and color is so different from the factory lights. Makes the front end look kinda haywire when the lights are on.

If you want the look, just buy the lights on Amazon (F150 replacement fog lights)(plastic) and bolt em in there.

I did install some very nice led fog lights and with @Geofferstang 's help, wired them to act exactly as if Ford supplied the Mach 1 with fog lights, including Forscan options and dash indicator. So you can do better installing foglights and wiring in your 202X +$50,000 machine, rather than treating it like a 1976 Maverick.

Just my humble opinion. Dont wanna start any arguments, just be aware of what you're buying.

 

[Boyd]

And added a breather catch can kit yesterday. Thanks @ice445 .

 

[Coastal-Mach]

Hey everyone, this is my first post, so I just wanted to say hello and share a picture of my Mach 1 after getting a ceramic coating and PPF protection film done today.

Welcome Antonio!!!

 

[Roady68]

Tried to install Ford Performance hood structs that have been in a box for a year. The 1" hole recommended in battery box cover isn't big enough. Ended up with not as neat oval hole. Proceeded to drop the fender mount on the side I was working on down in to the fender. Fished around behind the wheel well liner with magnet and got it out after a few minutes. Stuffed towels in the gap to prevent it again. Went to the other side and realized that there were three hood pin mounts, and only one fender mount. Ugh. Removed the two pin mounts I installed and put it all back into box for now. I'll keep using prop rod for hood. I will probably buy a new battery lid cover.

 

[Mikepol2]

Tried to install Ford Performance hood structs that have been in a box for a year. The 1" hole recommended in battery box cover isn't big enough. Ended up with not as neat oval hole. Proceeded to drop the fender mount on the side I was working on down in to the fender. Fished around behind the wheel well liner with magnet and got it out after a few minutes. Stuffed towels in the gap to prevent it again. Went to the other side and realized that there were three hood pin mounts, and only one fender mount. Ugh. Removed the two pin mounts I installed and put it all back into box for now. I'll keep using prop rod for hood. I will probably buy a new battery lid cover.

I originally had the Ford performance kit as well, but after reading comments here, decided that the Redline would be a better option and have been very pleased with those results.

 

[Johnnystang2018]

Had my Wheels powder coated the week before the hurricane.. So today I cleaned the car up like never before and since I didn’t post any pictures before the storm here they are…
Wheels are project6GR Sevens forged GT500 style, R spec 19x11 & 19x11.5 tires PS4S 305 30 & 315 30.
The color was gloss graphite originally
New color is called Mars2 from Prismatic Powders it is a glittery red, flake, but it’s so dark that unless you’re in full sun looks black.
The wheels are about 3years old I was having some problems with the finish.
Little bit disappointed with the shop that did it. They cut a few corners and instead of baking the clear twice they just sprayed a heavy layer of clear coat when I asked them to do extra layer of clear. Because of that there is heavy like super heavy orange peel. I tried not to show it for pictures.

 

[Mikepol2]

Had my Wheels powder coated the week before the hurricane.. So today I cleaned the car up like never before and since I didn’t post any pictures before the storm here they are…
Wheels are project6GR Sevens forged GT500 style, R spec 19x11 & 19x11.5 tires PS4S 305 30 & 315 30.
The color was gloss graphite originally
New color is called Mars2 from Prismatic Powders it is a glittery red, flake, but it’s so dark that unless you’re in full sun looks black.
The wheels are about 3years old I was having some problems with the finish.
Little bit disappointed with the shop that did it. They cut a few corners and instead of baking the clear twice they just sprayed a heavy layer of clear coat when I asked them to do extra layer of clear. Because of that there is heavy like super heavy orange peel. I tried not to show it for pictures.

Did you have to use different front spacers and studs?

Sponsored