From where can I get FP track handling kit?

[Chevy mustang]

Good day

i’m looking for FP track handling kit, however it seems there is a supplier issue for this kit since 6 months ago

I contacted levittownfordparts, steeda, LMR, all stated the same , there is a supplier issue and they don’t have it in the stock

i’m trying to find any store who have the kit in the stock

Sponsored

 

[Jxp1962]

Good luck, I have had one on backorder from summit since February, ive checked all over and they are on backorder everywhere…

 

[S550HPP]

I saw the springs and sways on classifieds.​

 

[GrabberBargeCaptain]

I couldn't find it in January of 2024 even. I made my own kit.

 

[JakeLethal]

Good day

i’m looking for FP track handling kit, however it seems there is a supplier issue for this kit since 6 months ago

I contacted levittownfordparts, steeda, LMR, all stated the same , there is a supplier issue and they don’t have it in the stock

i’m trying to find any store who have the kit in the stock

Hey there! Yea, we're direct with Ford Performance at Lethal & it's been hard to get.

I will say that SUPPOSEDLY, they have it listed to be back available 7/31.
That, I would say is subject to change. I apologize.

But, still feel free to check with us around that time and it takes just a few minutes to check! Thanks! #teamlethal

https://www.lethalperformance.com/f...ndling-pack-2015-2023-mustang-m-fr3a-m8a.html

 

[Gallatyn]

I have the Ford Performance Magneride Handling pack on my 2019 Bullitt which uses the same sway bars. My front passenger side sway bar bushing broke two weeks ago (had only been installed 15 months ago). I can't find the bushing kit (M-5490-BKD) or the FP Track Sway Bar kit (just so I can get the bushing) anywhere. I have a loan car from the dealer but I don't know how long I'll have it. I don't know what they do in cases like this. This is my daily. Super frustrated.

 

[S550HPP]

As long as you can get the springs, B6 and Eibach front sways bar will be fine. I did B6 and Eibach front on soft with Ford 24 MM rear, HPP stock springs and the cornering balance is literally perfect. Have yet to push it hard enough to get over or under steer and I'm over double the limit on off and on ramps on UHP AS tires, with no drama or screeching tires. Got lucky with the set up.

 

[GrabberBargeCaptain]

^ This is true, I couldn't find the FP sway bar when i bought mine, so i subbed the Steeda sway bars in place. The springs and dampers were easy to find though.

Sponsored