Wheels - best bang for the buck?

[robvas]

a set "close to a grand" is cheap...
they won't be flow formed or lighter than stock.
I personally run Savini SV-F series.
They are very light and semi pricey.

Flow formed, 21lbs each

all the wheel sites sell these, look for a coupon to get them under $1000. They have them in black bronze or silver

I just bought a set last month, they were $100 cheaper before the end of the year...

https://eurowheelusa.com/products/19-inch-aodhan-aff7-bronze-wheels-19x9-5-35-5x114-3-rims-set-4

Sponsored

 

[illtal]

I run the same. Are yours black or silver?

I have a set of the SV-F5 in bronze and a set of SV-F1 in black good sir

 

[illtal]

Flow formed, 21lbs each

all the wheel sites sell these, look for a coupon to get them under $1000. They have them in black bronze or silver

I just bought a set last month, they were $100 cheaper before the end of the year...

https://eurowheelusa.com/products/19-inch-aodhan-aff7-bronze-wheels-19x9-5-35-5x114-3-rims-set-4

21 lbs is a good weight, i believe mine at 20*10 are around 24 lbs.
I haven't weighed the 20*11s

 

[Need4SpeedMotors]

Hey this is Junior from Need 4 Speed Motorsports, this is my car on Project 6GR Ten's. If you need help narrowing down your search for any wheels feel free to reach out, I would be happy to help.

 

[nicksalvadore24]

I've also done a lot of research on this, general consensus seems that LMR's SVE wheels are the best value. I'm probably going with the SVE SP2s when I get new wheels. A lot of people on here have SVE wheels and seem to have no complaints

 

[shogun32]

Leads up to the question: where's the best value in what IS available?

https://www.performanceplustire.com.../mr126-matte-white-w-milled-accents/ws:20x10/

If you want a set in 19x9.5 and already drilled for Mustang, I've got a set NIB on my shelf.

 

[robvas]

I've also done a lot of research on this, general consensus seems that LMR's SVE wheels are the best value. I'm probably going with the SVE SP2s when I get new wheels. A lot of people on here have SVE wheels and seem to have no complaints

I was going to buy some SVE's but they have almost nothing in stock except some 11" wide wheels, and then bronze wheels. I've bought their wheels for New Edges in the past.

 

[nicksalvadore24]

I was going to buy some SVE's but they have almost nothing in stock except some 11" wide wheels, and then bronze wheels. I've bought their wheels for New Edges in the past.

Yeah no kidding, the 19x10 SP2s have been out of stock for months. How'd you like the wheels you have on the new edge?

 

[shogun32]

https://www.mustang6g.com/forums/threads/matts-pursuit-of-suspension-and-wheels.131958/page-2

You can still find MRR M600 on ebay in 19x10/11. I have a half new-in-box set in 19x11e24/50, or "bronze" (more like light milk chocolate brown) M600 20x11e50 still in the box ($700 for 5 wheels). and a set of honest bronze TSR in I think 20x10 also NIB. etc etc etc

The first 'gray' wheel you see at the URL above (you'll also see one of the 9.5s in pink plastidip) I would be happy to be rid of a 19x9.5/10.5 set. $600/4 NIB.

Shipping won't be kind but doable.

 

[robvas]

Yeah no kidding, the 19x10 SP2s have been out of stock for months. How'd you like the wheels you have on the new edge?

They are decent. Replica wheels with the same stamping on them I have bought from other companies on eBay

 

[MAGS1]

SVE (LMR), Project 6GR (sponsor here via Need4Speed) and Apex (also a sponsor here) are really good wheels for what I would say is a really good price. Check the classified section here, someone has a set of 19x10 square of the Apex SM10’s up for sale at a good price (I’ve been toying with the idea of buying them). There’s other options in the classifieds as well at good prices. Most are well taken care, just used vs new.

 

[MAGS1]

Here’s the Apex wheels listed in the classified

https://www.mustang6g.com/forums/threads/apex-sm-10-19x10-et40-square-set-1-500-obo.195681/

 

[Rodpwnz]

I am much like you and wanted the best value from a strength and weight perspective, while also in an aesthetic style I like.

I have flow formed LMR SP2's - very light and strong, and were around $1200 a set for gloss black 19x10 square. They look very similar design to PP2 wheels.

I would not buy cast OEM wheels, ever.

 

[Trace]

No more black. I want machined face or silver paint

 

[Trace]

Do 2024 S650 wheels have the same bolt pattern/offset as 2022 S550?

Sponsored